Einhell PXC 18V Combi Drill Kit - Brushless, 60Nm, 2x4.0Ah Batteries

Open the drill chuck by turning the chuck collar, insert the drill bit, and tighten the chuck collar to secure the bit.

Use drill bits appropriate for the material you are working with (e.g., wood, metal, masonry).

Battery life varies based on usage and material. The kit includes two 4.0Ah batteries, providing extended run times. Consider having a spare battery for continuous use.

Yes, this drill is part of the Power X-Change family and is compatible with all Einhell Power X-Change batteries.

Use the torque adjustment collar to select the appropriate torque setting for your task. Start with a lower setting and increase as needed.

The QuickStop function quickly stops the drill's rotation when the trigger is released, enhancing safety and allowing for faster tool changes.

Store the drill in the provided stackable case in a dry, safe location when not in use. Remove the battery when storing for extended periods.

Please refer to the product documentation or contact Einhell customer service for warranty information.

Check the battery charge and ensure the battery is correctly inserted. If the battery is charged, check the power button and trigger.

Check the battery charge. If the battery is low, recharge it. Also, check that you are using the correct speed and torque settings for the material.

Clean the drill chuck and bit. Make sure the bit is correctly inserted and try tightening the chuck again. If still not working, inspect the chuck for damage.

Make sure the mode selector is set to the impact drill position. Ensure you are applying sufficient pressure while drilling into hard materials.

Check the charger's power connection. Make sure the battery is correctly inserted into the charger. Try a different outlet and inspect the charger for any damage.