Shopping.co.uk

Plumbright Copper Press-Fit Fitting Coupling - 22mm - 6270M.22B

Plumbright Copper Press-Fit Fitting Coupling - 22mm - 6270M.22B

Copper Press Fittings offer a speedy solution for domestic, commercial and industrial applications...

Best current price£2.12from City Plumbing GB

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £2.12 - £16.93

View price history by clicking the chart icon.

City Plumbing GBPlumbright Copper Press-Fit Fitting Coupling 22Mm 6270M.22b
Free delivery in 1–3 days
£2.12
Visit shop

Product Information

Full details

The Plumbright Copper Press-Fit Fitting Coupling (6270M.22B) is designed for professional plumbers and experienced DIYers looking to expedite copper pipe installation in domestic, commercial, or industrial plumbing systems. Its primary benefit is the elimination of hot works, allowing for secure, heat-free jointing that is both aesthetically pleasing and permanent. While it offers unmatched speed, it is important to note that this fitting requires a compatible M-profile press tool to ensure a leak-proof connection.

All features

Model Part Number6270M.22B
BrandPlumbright

Extended Product Information

FAQs

Can I use these fittings with PEX or plastic piping?

No, these are specifically engineered for copper piping only.

Is this fitting suitable for gas lines?

Always check your local building codes and the specific certification of the fitting before using it for gas applications.

What happens if I make a mistake while pressing?

The press-fit joint is permanent; if an error occurs, the section of the pipe must be cut out and replaced with new fittings.

Does it matter which M-profile tool I use?

Use a tool calibrated for M-profile jaws to ensure the correct compression force is applied.

Do I need to apply pipe dope or thread sealant?

No, the internal O-ring provides the necessary seal; do not use lubricants or sealants as they can damage the O-ring.

Troubleshooting

Joint leaks immediately after pressing

Verify the pipe was inserted to the full depth and was free of scratches or burrs. Ensure the correct M-profile jaw was used.

Tool fails to close completely around the fitting

Check that the fitting is centered in the jaw and that no debris is obstructing the press mechanism.

Pros and Cons

Pros

  • Significantly faster installation compared to traditional soldering
  • No fire risk due to heat-free pressing mechanism
  • Creates a clean, professional aesthetic on pipe joints
  • Compatible with a wide variety of copper pipe wall thicknesses
  • Highly reliable and long-lasting permanent connection

Cons

  • Requires an investment in a dedicated M-profile press tool
  • Cannot be adjusted or rotated once the press cycle is complete
  • Limited availability for repair if the installer lacks the specific press equipment

Setup, Compatibility & Care

  1. Preparation: Cut the 22mm copper pipe squarely and ensure the end is free of burrs or scratches, as these can damage the internal O-ring.
  2. Marking: Measure the insertion depth (refer to the fitting manufacturer guidelines) and mark the pipe with a permanent marker to confirm the pipe is fully inserted into the coupling.
  3. Alignment: Slide the pipe into the fitting and ensure it rests against the internal stop.
  4. Pressing: Use an M-profile press jaw corresponding to the 22mm size. Position the jaw squarely over the bead of the fitting and initiate the press cycle until the tool completes the operation.
  5. Maintenance: Periodically check the press tool jaws for wear or debris build-up to maintain seal consistency. Ensure the fitting remains in a dry, temperate environment during storage to prevent premature oxidation.

Price History

DatePrice
Visit shop