Uniblade Bath Panel Fixing Kit - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Uniblade Bath Panel Fixing Kit is designed for homeowners and DIY enthusiasts seeking a clean, secure, and damage-free way to install bath panels. Its key benefit is a no-mess, tool-free installation process that eliminates the need for screws, silicone, or nails. A minor consideration is that while universal, users should still verify compatibility with their specific bath and panel materials.
All features
| Colour | White |
|---|---|
| Model Part Number | UPS |
| Brand | uniblade |
Extended Product Information
FAQs
Do I need any tools to install this kit?
No, the Uniblade Bath Panel Fixing Kit is designed for tool-free installation. It uses a secure adhesive bracket system.
Can I use this kit with a shower bath?
Yes, the kit is designed for universal fit and is compatible with standard, shower, and corner baths.
What materials can the bath panel be made of?
The kit works with wooden, acrylic, and MDF bath panels.
How do I remove the bath panel later for maintenance?
The panels can be easily removed and reattached by gently pulling them away from the brackets without the need for tools.
Will this damage my bath or walls?
No, the system is designed to be damage-free, as it does not require screws, silicone, or nails, thus avoiding holes in walls or baths.
Is this a permanent solution?
The brackets provide a secure, long-term fix, but also allow for easy removal and reattachment for maintenance or temporary access.
Troubleshooting
Bath panel feels loose after installation.
Ensure the bath edge and the back of the panel were thoroughly cleaned and dried before application. Re-apply pressure to the brackets to ensure a strong bond. Check for any obstructions preventing a flush fit.
Brackets do not seem to adhere properly.
Verify that the surface is clean, dry, and free of any residue (silicone, dust, grease). Ensure the temperature is within a suitable range for adhesive application (avoid very cold or humid conditions).
Panel is difficult to remove.
Gently wiggle the panel from side to side while pulling outwards. If still stubborn, a very thin, flat tool (like a plastic spatula) can be used cautiously to ease it away from the brackets, being careful not to damage the panel or wall.
Pros and Cons
Pros
- Quick and easy installation without special tools.
- Clean finish with no visible fixings like screws or silicone.
- Universal compatibility with most bath and panel types.
- Enables simple panel removal for maintenance access.
- Avoids wall damage often associated with traditional fixing methods.
- Cost-effective solution compared to professional installation.
Cons
- May require careful alignment for optimal fit on non-standard bath edges.
- The weight of the panel might slightly affect the long-term adhesion of the brackets if not applied to a perfectly clean surface.
- Not suitable for heavily damaged or uneven bath edges where a rigid support is needed.
- Initial purchase cost might be higher than basic screws for some users.
Setup, Compatibility & Care
Setup:
- Ensure the bath edge and the back of the bath panel are clean, dry, and free from dust or grease.
- Peel the protective backing from the adhesive on the Uniblade brackets.
- Position the brackets on the inside lip of the bath and firmly press the bath panel against them.
- Ensure the panel is securely held in place.
Compatibility:
This kit is designed for universal fit. It is compatible with:
- Bath Types: Standard straight baths, shower baths, and corner baths.
- Panel Materials: Wooden, acrylic, and MDF bath panels.
Care:
To maintain the effectiveness of the brackets, ensure the area around the bath panel remains clean. Avoid using abrasive cleaners directly on the brackets, as this may degrade the adhesive over time. If the panel needs to be removed, gently pull it away from the brackets. To reattach, ensure both the bracket and the panel surface are clean.
