Car-Rep Auto Spray Paint - Jet Black - 400ml

This paint is suitable for most primed automotive surfaces, including metal, plastic (with appropriate plastic primer), and previously painted finishes. Always test in an inconspicuous area first.

The paint features a fast-dry time. Touch dry is typically within minutes, but full curing can take several hours depending on temperature and humidity. Recoat times are usually around 10-15 minutes.

It means the paint inside the can will not dry out or become unusable over time. You can use as much or as little as you need from the can, and store the remainder for future use, ensuring no product is wasted.

The paint has a heat resistance of up to 100°C.

Store the can in a cool, dry place, away from direct sunlight, heat sources, and open flames. Ensure the nozzle is clear before storing.

Yes, for optimal adhesion and finish on plastic parts, it is recommended to use a specific plastic primer before applying the auto spray paint.

The product has a shelf life of 60 months.

Shake the can more frequently during use. Ensure the nozzle is not clogged. Hold the can at a consistent distance and move steadily.

Apply paint in lighter, thinner coats. Ensure the can is held at the correct distance (typically 20-30cm). Avoid spraying in excessively humid or cold conditions.

Verify the surface was properly cleaned and prepared. Ensure the correct primer was used if applying to bare plastic or metal. Allow adequate drying time between coats.

Ensure the nozzle is clear and properly attached. Shake the can thoroughly. If the issue persists, the can may be empty or faulty.