Best current price£39.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£39.75Visit shop B&Q - Adjustable Cv Joint Propshaft Remover Removal Tool With Bearing Reducers Split
Visit shop2 offers from £39.75
View price history by clicking the chart icon.
This guide is for automotive mechanics and DIY enthusiasts looking for an efficient way to remove CV joints and split propshafts. The key benefit is the time-saving and damage-reducing capability, allowing for axle and joint servicing without full disassembly. A potential caveat is that its effectiveness relies on proper adjustment to vehicle-specific dimensions.
| Model Part Number | AV534 |
|---|---|
| Brand | AB Tools |
It is designed for most passenger vehicles. The adjustable depth and bore size, along with the included bearing reducers (23mm, 28mm, 32mm ID), provide broad compatibility.
No, one of the key benefits of this tool is that it allows for CV boot installation and axle servicing without removing the axle from the vehicle or the CV joint from the axle.
This tool is primarily designed for the *removal* of CV joints and the separation of propshafts. Installation procedures may vary.
It significantly saves labor time and reduces the risk of damaging the transmission or CV joint components compared to hammering or prying methods.
The tool comes with three bearing reducers with internal diameters of 23mm, 28mm, and 32mm.
After use, clean the tool with a dry cloth, remove any grease or dirt, and store it in a dry environment to prevent rust. Lightly lubricate adjustment points if they become stiff.
Ensure the depth and bore size are correctly adjusted to grip the CV joint and axle firmly. Check that the bearing reducers are properly seated.
Apply penetrating lubricant to the joint area and allow it to soak. Ensure the tool is positioned to apply maximum leverage and force directly to the joint's separation point.
Clean any debris from the adjustment threads and apply a light lubricant like WD-40 or a general-purpose grease.
Setup: To use the CV joint removal function, position the tool around the CV joint and axle. Adjust the depth and bore settings to securely grip the joint housing and the axle shaft. Ensure the bearing reducers are correctly seated on the CV joint if specified for the application. For propshaft splitting, position the tool to apply pressure evenly to the shaft connection.
Compatibility: This tool is suitable for most passenger vehicles. It includes three bearing reducers with internal diameters of 23mm, 28mm, and 32mm. Always verify that the CV joint housing and axle shaft dimensions are compatible with the tool's adjustment range and included reducers before use.
Care: After use, clean the tool thoroughly with a dry cloth to remove grease and debris. Store in a dry place to prevent rust. Periodically check adjustment mechanisms for smooth operation and lubricate lightly if necessary.
