Best current price£6.98from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£6.98Visit shop Hep2o Men's White Keyless Brass Adaptor 15Mmx1/2" Pushfit/ Plastic Plumbing Fitting Klb29-15
Visit shop
B&Q£11.35Visit shop B&Q - Keyless Brass Adaptor 15mmx1/2" Pushfit/ Male White Plastic Plumbing Fitting Klb29-15
Visit shop2 offers from £6.98 - £11.35
View price history by clicking the chart icon.
The Hep2O Keyless Male Adaptor is designed for professional plumbers and DIY enthusiasts who need a reliable, tool-free connection between 15mm piping and 1/2-inch threaded components. Its primary benefit is the In4Sure joint recognition technology, which provides tactile and audible feedback to ensure a secure installation, though users should note it is specifically optimized for use with Hep2O and copper systems rather than cross-brand plastic pipe variations.
| Model Part Number | KLB29-15 |
|---|---|
| Brand | Hep2O |
No, this fitting is specifically designed for domestic water distribution and central heating systems only.
No, Hep2O pipe inserts are only required when using plastic Hep2O pipe, not for copper.
The fitting is rated for standard domestic water pressures; refer to the Hep2O technical manual for specific temperature/pressure charts.
Yes, the fitting is designed to be demountable and reusable provided the O-rings and grab teeth are not damaged.
The Hep2O range is manufactured in the UK.
Check that the pipe end is not burred or deformed; re-cut and chamfer if necessary.
Ensure the pipe is pushed in fully past the O-ring and the collet is seated correctly.
Ensure there is no pressure in the line, then push the collet firmly into the body before pulling the pipe.
To ensure a leak-free installation, always ensure the pipe end is cut square and is free from burrs or sharp edges. If using copper pipe, polish the end with a fine abrasive pad to ensure a smooth surface for the internal O-ring seal. When demounting, simply push the collet inward while pulling the pipe out; no keys are required. Avoid using excessive jointing compounds on the fitting, as the internal seals are designed to work without them. Store in a clean, dry area to prevent debris from entering the internal mechanism before installation.
