Schneider Electric Lisse Screwless Deco Dimmer Switch - Satin Brass

No, this specific dimmer is explicitly not compatible with LED, CFL, or fluorescent lights. It is designed for use with traditional incandescent and halogen bulbs only.

The dimmer has a maximum load capacity of 250 Watts.

'1 Gang' means it controls one light or light fitting. '1 Way' means it is designed to control that light from a single location.

Wipe gently with a soft, slightly damp cloth. Avoid harsh chemicals or abrasive cleaners to maintain the finish.

Installation requires basic electrical wiring knowledge. If you are not comfortable with electrical work, it is recommended to hire a qualified electrician.

The plate has a 7mm raised edge with a rounded profile.

This product is typically a faceplate and mechanism and requires a standard UK back box to be fitted into the wall.

Check that the power is restored and that the wiring is correctly connected to the terminals. Ensure the bulb is compatible and not burnt out.

This may indicate an incompatible bulb type (e.g., trying to dim an LED). Ensure you are using dimmable incandescent or halogen bulbs. The bulb wattage may also be too low for the dimmer's minimum load.

Some warmth is normal, especially when under load. However, if it becomes excessively hot, turn off the power immediately and check the total bulb wattage does not exceed the 250W limit.

Ensure the dimmer mechanism is securely and evenly mounted to the wall box. Check for any obstructions behind the plate.