Shopping.co.uk

Holts - Black Bumper & Trim Paint Aerosol Spray Paint - High Gloss Finish - 300ml

Holts - Black Bumper & Trim Paint Aerosol Spray Paint - High Gloss Finish - 300ml

Holts BU1D - Black Bumper & Trim Paint 300ml is a high-performance, long-lasting paint specificall...

Best current price£10.09from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£10.09Visit shop

Holts Black Bumper & Trim Paint Aerosol Spray Paint High Gloss Finish 300ml

Visit shop

One Offer

1 offer from £10.09

View price history by clicking the chart icon.

eBayHolts Black Bumper & Trim Paint Aerosol Spray Paint High Gloss Finish 300ml
Free delivery in 1–3 days
£10.09
Visit shop

Product Information

Full details

This guide is for anyone looking to restore or refresh the appearance of their vehicle's bumpers and trim using Holts Black Bumper & Trim Paint. The key benefit is a durable, high-gloss finish that resists chipping and fading, ensuring long-lasting protection. Note that proper surface preparation is crucial for optimal results.

All features

Model Part NumberBU1D
BrandHolts

Extended Product Information

FAQs

What surfaces can I use this paint on?

Holts Black Bumper & Trim Paint is designed for plastic and rubber bumpers and trim.

How long does it take for the paint to dry?

Drying times can vary, but allow about 30 minutes between coats and a few hours for full curing.

Do I need to prime the surface before painting?

Priming is not always necessary, but for optimal results and to help with adhesion, particularly on worn surfaces, priming is recommended.

How many coats of paint should I apply?

Apply several thin coats, allowing each coat to dry before applying the next, for best results. Two or three coats are usually sufficient.

How do I clean the painted surface?

Clean with mild soap and water. Avoid abrasive cleaners or scrubbing pads.

Is this paint resistant to UV rays?

Yes, this paint is formulated to be resistant to fading caused by UV exposure.

Troubleshooting

Paint is running or dripping.

Apply thinner coats and ensure you are holding the can the correct distance from the surface.

Poor adhesion of the paint.

Ensure the surface is properly cleaned and prepared before application. Lightly sand the surface if needed.

Uneven finish.

Apply multiple thin coats instead of one thick coat and ensure even coverage.

Pros and Cons

Pros

  • Durable, long-lasting finish.
  • Easy to apply, saving time and effort.
  • Water-resistant, suitable for outdoor use.
  • Restores the appearance of bumpers and trim effectively.

Cons

  • Requires proper surface preparation for best results.
  • May require multiple coats for complete coverage.
  • Aerosol application can be affected by weather conditions (wind).

Setup, Compatibility & Care

  1. Preparation: Clean the surface thoroughly with a suitable cleaner to remove dirt, grease, and old wax. Sand the surface lightly if necessary to improve adhesion.
  2. Application: Shake the aerosol can well before use. Apply thin, even coats, keeping the can about 20-30 cm from the surface. Allow each coat to dry before applying the next.
  3. Compatibility: This paint is specifically designed for bumpers and trim made of plastic or rubber. Always test on a small, inconspicuous area first to check compatibility and color match.
  4. Care: Once the paint has fully cured, clean the painted surfaces with mild soap and water. Avoid abrasive cleaners or scrubbing pads.

Price History

DatePrice
Visit shop