Best current price£18.50from B&Q
Shopping.co.uk recommended and popular offers
B&Q£18.50Visit shop B&Q - Rf Mini Dimming Controller With 11 Key Remote For Single Colour 12V/24V Led Strip Lights
Visit shop4 offers from £18.50 - £22.00
View price history by clicking the chart icon.
The ENER-J RF Mini Dimming Controller is the ideal solution for homeowners and DIY enthusiasts looking to add professional-grade dimming and effect control to their single-colour 12V or 24V LED strip installations. By pairing a compact controller with an 11-key RF remote, it provides the convenience of wireless operation from up to 15 metres away, allowing for seamless adjustments to brightness and lighting modes. While it offers excellent versatility for standard setups, it is important to note that this device is designed exclusively for single-colour LED strips and will not support RGB or multi-colour variations.
| Brand | ENER-J |
|---|
No, this controller is designed exclusively for single-colour LED strips.
Yes, but they may need to be paired specifically depending on the signal frequency of your specific units.
The remote has an effective range of up to 15 metres in an open environment.
No, it is intended for indoor use and should be kept away from water and high-humidity areas.
Yes, the controller typically retains the last brightness setting used before the power was disconnected.
Yes, the controller is compatible with both 12V and 24V systems.
Check that the input power supply is plugged in and providing the correct voltage. Also, ensure that the remote battery is charged and installed correctly.
Ensure that the connections between the LED strip and the controller are secure and that the power supply wattage is sufficient for the total length of the strip.
Ensure the controller is not fully enclosed in a thick metal box, which can interfere with RF signals. Move the controller to a location with fewer obstacles if necessary.
To set up the system, connect your 12V or 24V DC power supply to the input side of the controller, ensuring the positive and negative terminals are aligned correctly. Next, connect your LED strip to the output side, again verifying that the polarity matches the markings on the device.
Compatibility Note: Always verify that your power supply voltage matches the voltage requirements of your LED strips (12V or 24V). Using a 24V supply with a 12V strip will cause damage.
Care Instructions:
