Shopping.co.uk

Hella Camshaft Position Sensor - 6PU 009 121-041

Hella Camshaft Position Sensor - 6PU 009 121-041

Hella Sensor, camshaft position. This Hella Sensor, camshaft position (Part Number: 6PU 009 121-04...

Best current price£25.20from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

10 offers from £25.20 - £36.36

View price history by clicking the chart icon.

eBayHELLA 6PU 009 121-041 Sensor, camshaft position - 12V - 3-pin connector
Free delivery in 1–3 days
£25.20
Visit shop

Product Information

Full details

This Hella Camshaft Position Sensor (Part Number: 6PU 009 121-041) is designed for Vauxhall and Opel owners seeking a reliable OE-quality replacement part. Its key benefit is ensuring accurate engine timing for optimal performance and fuel efficiency. A potential caveat is the need to verify exact fitment for your specific vehicle model and year before purchase. This sensor is a Hall Sensor type, operating at 12V, with a length of 224mm, 3 pins, and 2 mounting bores, providing a direct replacement for specific 1.8L engine applications.

All features

Model Part Number6PU 009 121-041
BrandHella

Extended Product Information

FAQs

What vehicles is the Hella 6PU 009 121-041 compatible with?

This sensor is typically compatible with Vauxhall and Opel models such as Tigra Twintop, Meriva A, Signum, and Astra H GTC, usually equipped with 1.8L engines produced between 2003 and 2010. Always verify fitment using the part number and OEM equivalents against your specific vehicle.

What is the voltage and pin count of this sensor?

This is a 12V sensor with 3 pins and 2 mounting bores.

How do I know if my camshaft position sensor needs replacing?

Common symptoms include a Check Engine Light, rough idling, difficulty starting, stalling, poor fuel economy, or increased emissions. A diagnostic scan can often confirm a faulty camshaft position sensor.

What does a camshaft position sensor do?

It tells the engine control unit (ECU) the exact position of the camshaft. This information is crucial for synchronizing fuel injection and ignition timing, ensuring the engine runs efficiently.

Is this a Hall Sensor type?

Yes, this Hella sensor is a Hall Sensor type.

What is the length of the sensor?

The sensor has a length of 224mm.

Where is the camshaft position sensor typically located?

It is usually found near the camshaft pulley, on the cylinder head or timing cover.

Troubleshooting

Check Engine Light is on after installation

Ensure the electrical connector is securely attached and there are no bent pins. Clear any stored diagnostic trouble codes (DTCs) using an OBD-II scanner. If the issue persists, re-verify part compatibility.

Engine runs rough or misfires

Double-check the sensor's installation and ensure it is seated correctly. Verify the camshaft timing itself has not been disturbed. A faulty connection or an incorrect part can cause these symptoms.

Engine will not start

Confirm the sensor is properly connected and receiving power (requires diagnostic tools). Ensure the correct part number was installed and is compatible with your vehicle's ECU.

Pros and Cons

Pros

  • Ensures accurate engine timing.
  • OE-quality standards for reliability.
  • Designed for direct fitment on compatible models.
  • Durable construction for longevity.
  • Facilitates optimal engine performance and fuel economy.

Cons

  • Requires careful verification of vehicle compatibility before purchase.
  • May require specialized tools for installation.
  • Specific to certain Vauxhall/Opel 1.8L engines.

Setup, Compatibility & Care

Compatibility Verification:

Before purchasing, it is crucial to confirm that this sensor is compatible with your specific vehicle. Check your vehicle's make, model, engine size (typically 1.8L), and production year (2003-2010 for mentioned models). Compare the OEM part numbers listed (OPEL/VAUXHALL: 12 38 425, 90 53 606, 90536064) with your vehicle's existing part or manufacturer specifications. The sensor length (224mm) and pin count (3) are also important verification points.

Installation:

  1. Safety First: Ensure the engine is cool and the battery is disconnected.
  2. Locate Sensor: Identify the camshaft position sensor on your engine. It is typically located near the camshaft pulley.
  3. Disconnect Connector: Carefully unplug the electrical connector from the old sensor.
  4. Remove Sensor: Unscrew or unbolt the old sensor. Be prepared for a small amount of residual oil.
  5. Install New Sensor: Position the new Hella sensor and secure it with the appropriate fasteners.
  6. Connect Connector: Reattach the electrical connector firmly.
  7. Reconnect Battery: Reconnect the vehicle's battery.
  8. Test: Start the engine and check for proper operation. A diagnostic scan may be necessary to clear any stored trouble codes.

*Professional installation is recommended if you are not familiar with automotive repairs.*

Care:

This sensor is a sealed electronic component and generally requires no specific maintenance. However, ensure the surrounding area is kept clean to prevent debris from interfering with its operation or installation. Avoid spraying cleaning agents directly onto the sensor or its electrical connector.

Price History

DatePrice
Visit shop