Best current price£149.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£149.99Visit shop B&Q - Luminosa Drive Outdoor Recessed Floor & Decking SteelIp67 18.6X24.7Cm
Visit shop2 offers from £149.99 - £169.95
View price history by clicking the chart icon.
The Luminosa Lighting Drive Outdoor Recessed Floor & Decking Light is designed for homeowners looking to enhance their outdoor living spaces with stylish and durable illumination. Its primary benefit is creating ambiance and highlighting landscape features with a robust, weather-resistant fixture. A key consideration is that the bulb is not included, requiring a separate purchase. This light offers a steel finish, IP67 rating for weather protection, and dimmable capabilities when paired with compatible bulbs, all within a 18.6 x 24.7cm footprint.
| Model Part Number | 8031440313230 |
|---|---|
| Brand | Luminosa Lighting |
The Luminosa Lighting Drive light uses an E27 base bulb. The bulb is not included with the fixture.
No, the bulb is not included. You will need to purchase an E27 base bulb separately.
Yes, the light is dimmable provided you use a dimmable E27 bulb and a compatible dimmer switch for installation.
An IP67 rating means the fixture is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes, making it suitable for outdoor use in various weather conditions.
Clean the steel finish with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals.
The dimensions of the light are 18.6cm in width and 24.7cm in height (or depth, depending on installation context).
Due to its recessed nature, professional installation is recommended to ensure proper and safe setup according to electrical and building standards.
Verify that the power supply is connected and the circuit breaker is on. Ensure the E27 bulb is correctly installed and not burnt out. Check all wiring connections, especially if recently installed.
This often indicates an issue with the bulb or the dimmer setup. Try replacing the bulb with a new E27 bulb. If dimming, check that both the bulb and the dimmer switch are compatible and functioning correctly. Ensure connections are secure.
Although IP67 rated, ensure the fixture's seals are intact and properly seated during installation. If water ingress is suspected, disconnect power immediately and inspect the fixture. Professional assessment may be needed.
Confirm that a dimmable E27 bulb is installed and that a compatible dimmer switch is used. Check the wiring of the dimmer switch and ensure it is correctly rated for the load.
Setup: This fixture is designed for recessed installation into floors or decking. Ensure the installation area is prepared according to local building codes and electrical safety standards. Professional installation is recommended due to the nature of recessed lighting. A compatible E27 base bulb is required; ensure the bulb's wattage does not exceed the fixture's maximum rating (check packaging for details, not provided in product info). If dimming is desired, a dimmable E27 bulb and a compatible dimmer switch must be used.
Compatibility: The light uses an E27 lamp base, which is compatible with a wide range of E27 LED, incandescent, or halogen bulbs. For dimming functionality, use only bulbs explicitly labeled as 'dimmable'.
Care: Clean the exterior with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the steel finish. Regularly check for any debris accumulation around the fixture, especially if installed in areas prone to leaves or dirt. Ensure the fixture remains properly sealed to maintain its IP67 rating.
