Slurry Primer - GLEAN - 14.25kg

Refer to the product packaging for the precise water-to-primer ratio. Typically, a specific volume of water is added to a measured amount of powder to achieve the desired slurry consistency.

No, GLEAN Slurry Primer is specifically designed for outdoor paving applications like patios, terraces, pathways, and driveways.

Unopened GLEAN Slurry Primer powder should be stored in a cool, dry place. Check the packaging for the specific expiry date. Once mixed, the slurry should be used within a short timeframe.

The primer itself does not 'set' in isolation. It cures as the bedding mortar sets. Follow the mortar manufacturer's guidelines for setting times before walking on or using the paved area.

GLEAN Slurry Primer is intended for use when initially laying new paving materials, not for bonding to existing, fully set surfaces.

A brush or roller is recommended for even application of the slurry primer. Choose tools that allow for consistent coverage on the back of the paving units or the bedding mortar.

Adjust the amount of water added. If too thin, add a small amount of primer powder. If too thick, add a little more water, mixing thoroughly to achieve a smooth, workable consistency as per product instructions.

Ensure the back of the paving element and the bedding mortar were clean and dry before application. Re-apply primer to the affected elements and ensure even coverage.

Work in smaller sections and mix only the amount of primer that can be applied within its pot life. Ensure conditions are not excessively hot or windy.