Best current price£12.50from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£12.50Visit shop (400Ml Aerosol) Plasti Dip - Glow In The Dark - Aerosol Spray Or Liquid Rubber Paint 5060418740269
Visit shop1 offer from £12.50
View price history by clicking the chart icon.
This Plasti Dip aerosol is for DIY enthusiasts and professionals seeking a unique, luminescent finish that also provides protective properties. Its key benefit is offering a vibrant, glow-in-the-dark effect combined with durable, flexible coating. A caveat is that optimal glow requires sufficient light exposure and a dark environment for visibility.
| Brand | Plasti Dip |
|---|
The duration of the glow depends on the intensity and duration of light exposure. Typically, it provides several hours of luminescence, fading gradually over time.
Yes, Plasti Dip can be applied over most painted surfaces, provided they are clean and free of contaminants. Test on a small area first to confirm compatibility.
Yes, Plasti Dip is commonly used on vehicles for custom finishes and protection. Always follow application guidelines and check local regulations regarding automotive modifications.
Generally, 3-4 light coats are recommended for good coverage and durability. For a stronger glow effect, additional coats may be beneficial. Always refer to the product's specific instructions.
Yes, Plasti Dip can be painted over with most standard paints. However, it's recommended to test compatibility first.
When stored properly in a cool, dry place away from direct sunlight and extreme temperatures, Plasti Dip aerosol cans typically have a shelf life of several years.
Plasti Dip provides a barrier that can help protect against moisture and corrosion, thus indirectly helping to prevent rust on metal surfaces when applied correctly and completely.
Ensure the can is shaken adequately and frequently during application. Maintain a consistent distance and speed while spraying. Apply in thin, even coats, allowing proper drying time between applications.
Verify the surface was properly cleaned and dried before application. Ensure any existing contaminants like oil or wax were removed. For smooth surfaces, ensure they were lightly scuffed for better adhesion. Apply additional coats if the initial layer was too thin.
Ensure the surface was adequately exposed to a strong light source for charging. The glow is most effective in complete darkness. Multiple coats can enhance the glow intensity.
Use a dedicated Plasti Dip remover or a citrus-based solvent. Gently peel or rub the coating away. If applied too thinly, removal can be more challenging.
Preparation: Ensure the surface to be coated is clean, dry, and free from grease, oil, or contaminants. Lightly scuffing smooth surfaces may improve adhesion. Always refer to the specific preparation guide included with your product.
Application: Shake the aerosol can vigorously before and during use. Apply in thin, even coats from approximately 10-16 inches away. Allow each coat to dry to the touch before applying the next. Multiple coats are typically recommended for optimal durability and glow. Refer to the product's application guide for specific recommendations on the number of coats and drying times.
Compatibility: Plasti Dip can be applied to a wide variety of substrates including metal, plastic, wood, concrete, glass, rope, fabric, and more. Test on an inconspicuous area first, especially on plastics, to ensure compatibility.
Care: Clean coated surfaces gently with mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the coating. The glow effect will naturally diminish over time and with UV exposure, but the protective coating remains. Reapplication may be necessary for continued protection and glow.
