FTX Zorro 1:10 Nitro Trophy Truck 4WD RTR RC Car - Blue - FTX - FTX5542B

Best current price£208.12from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£208.12Visit shop FTX 1:10 Zorro Nitro Trophy Truck 4WD RTR - Blue
Visit shop
Best current price£208.12from eBay
Shopping.co.uk recommended and popular offers
eBay£208.12Visit shop FTX 1:10 Zorro Nitro Trophy Truck 4WD RTR - Blue
Visit shop3 offers from £208.12 - £239.45
View price history by clicking the chart icon.
This guide is for anyone looking to get the most out of their FTX Zorro 1:10 Nitro Trophy Truck. Whether you're a beginner or have some RC experience, this guide will help you understand the features, setup, and maintenance of your truck. Please note that using a nitro engine requires some knowledge of engine tuning and safety precautions.
| Series | Zorro |
|---|---|
| Model Part Number | FTX5542B |
| Brand | FTX |
Use a high-quality nitro fuel specifically formulated for model engines. The manual should specify the recommended nitro percentage.
Refer to the manual for the proper break-in procedure. Generally, this involves running the engine at a rich setting for a few tanks of fuel to allow the engine components to properly seat.
Clean the air filter regularly, especially when running in dusty conditions. Inspect and clean after each run. Replace the filter element when it becomes too dirty or damaged.
Adjust the turnbuckles and shock absorbers to fine-tune the suspension. Stiffer suspension suits smoother tracks, whereas softer suspension is better for rough terrain.
The transmitter typically uses standard AA batteries. Check the transmitter for the exact battery requirements.
Replacement parts are usually available from the manufacturer or online RC retailers. Use the FTX part numbers to find the correct components.
Regularly inspect the engine for leaks, ensure proper lubrication, and tune it as needed. Follow the manufacturer's recommendations for engine maintenance.
Check fuel level, glow plug condition, and ensure the fuel lines are connected properly. Prime the engine and try again. Also ensure the transmitter is turned on and properly bound to the receiver.
The engine may need tuning. Adjust the high-speed needle and low-speed needle according to the manual. Check for air leaks and ensure the fuel tank is properly vented.
Check the fuel, ensure the engine is properly tuned, and inspect the air filter and fuel filter for blockages.
Check the radio transmitter batteries. Rebind the radio system and make sure the servos are connected correctly. Inspect for any physical obstructions.