Adept Press Stop End Mlcp Wras Approved - 25mm - Pack Of 10
Best current price£19.40from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£19.40Visit shop B&Q - Press Stop End Mlcp Wras Approved20mm Pack Of 10
Visit shopB&Q£19.40Visit shop All Offers
2 offers from £19.40 - £32.50
View price history by clicking the chart icon.
B&QB&Q - Press Stop End Mlcp Wras Approved20mm Pack Of 10
Free delivery in 1–3 days
£19.40
Visit shop
B&Q - Press Stop End Mlcp Wras Approved25mmPack Of 10Free delivery in 1–3 days£32.50Visit shop →
Product Information
Full details
The Adept MLCP Press Stop End (25mm) is designed for plumbers and installers working with multilayer composite pipe (MLCP) systems. Its key benefit is providing a secure and reliable seal to terminate pipe runs or isolate outlets quickly and efficiently without soldering. A potential consideration is the requirement for specific U-profile press tools compatible with MLCP systems. This product offers a durable, leak-free solution for potable water and heating applications.
All features
| Model Part Number | PSE25_10-PACK |
|---|---|
| Brand | Adept |
Extended Product Information
FAQs
What size pipe does this stop end fit?
This Adept MLCP Press Stop End is designed for 25mm multilayer composite pipe (MLCP).
Do I need special tools to install this?
Yes, you will need a press tool equipped with U-profile press jaws specifically sized for 25mm fittings.
Can this be used for gas lines?
No, this product is WRAS approved and designed for potable water and heating systems only. It is not suitable for gas installations.
Is soldering required for installation?
No, the press-fit connection eliminates the need for soldering.
How many stop ends are included in a pack?
Each pack contains 10 Adept MLCP Press Stop Ends.
What is the warranty period for this product?
Refer to the manufacturer's warranty documentation for specific details, as warranty information is typically provided separately.
Can I use this on copper pipe?
No, this fitting is specifically designed for multilayer composite pipe (MLCP) and is not compatible with copper pipe.
Troubleshooting
Leak detected after pressing
Verify that the correct U-profile press jaw was used and that the press tool was calibrated and fully actuated. Ensure the MLCP pipe was inserted to the full depth of the fitting. Re-press the fitting if necessary, or replace the fitting and pipe section if damage is suspected.
Press tool does not fit the fitting
Confirm you are using a U-profile press jaw set, not a different profile (e.g., TH, B, V). Ensure the jaw size matches the fitting size (25mm).
Fitting is difficult to slide onto the pipe
Check that the pipe end is correctly cut and deburred. Ensure you are using the correct size MLCP pipe (25mm) and that no debris is obstructing the pipe or fitting.
Pros and Cons
Pros
- Fast and easy installation without soldering.
- Durable construction with corrosion-resistant materials.
- WRAS approved for safe use with potable water.
- Provides a reliable, long-lasting, leak-free seal.
- Complies with relevant industry standards (EN ISO 21003).
Cons
- Requires a specific U-profile press tool.
- Not suitable for non-MLCP pipe systems.
- The initial cost may be higher than traditional methods for single installations.
Setup, Compatibility & Care
Setup:
- Ensure Pipe is Cut Square: Use a professional pipe cutter to make a clean, square cut on the 25mm MLCP pipe.
- Deburr the Pipe End: Remove any burrs from the inside and outside edge of the cut pipe.
- Insert the Stop End: Push the Adept MLCP Press Stop End fully onto the end of the multilayer composite pipe until it reaches the internal stop.
- Press the Fitting: Using a compatible U-profile press jaw and a calibrated press tool, firmly press the fitting onto the pipe according to the tool manufacturer's instructions. Ensure the press is completed correctly for a secure seal.
Compatibility:
- Pipe Type: Exclusively designed for use with 25mm Multilayer Composite Pipe (MLCP) systems that accept U-profile press fittings.
- Press Tools: Requires a press tool equipped with U-profile jaws sized for 25mm MLCP fittings. Always refer to your press tool manufacturer's compatibility chart.
- System Type: Suitable for domestic and commercial potable water and heating systems.
Care:
- Storage: Store in a clean, dry environment, away from direct sunlight and extreme temperatures.
- Installation Environment: Ensure the installation area is clean and free from debris that could contaminate the pipe or fitting.
- Maintenance: Once installed, these fittings require no user maintenance. Their durable construction ensures long-term reliability.