U-Pol Guide Dry Powder Coat - Black - 450ml
Best current price£25.86from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£25.86Visit shop 2 x U-Pol Guide #7 Dry Powder Coat 450ml Aerosol - Wet Filler Paint Defect UPOL
Visit shopeBay£25.86Visit shop All Offers
2 offers from £25.86 - £28.19
View price history by clicking the chart icon.
eBay2 x U-Pol Guide #7 Dry Powder Coat 450ml Aerosol - Wet Filler Paint Defect UPOL
Free delivery in 1–3 days
£25.86
Visit shop
OnBuy.com2 X U-Pol Guide #7 Dry Powder Coat 450Ml Aerosol - Wet Filler Paint Defect Upol 5060859873533
Free delivery in 1–3 days
£28.19
Visit shop
Product Information
Full details
The U-Pol Guide Dry Powder Coat is an essential tool for professional body shop technicians and DIY enthusiasts alike who require precision when sanding fillers or primers. Its primary benefit lies in its ability to reveal hidden surface imperfections, such as low spots and sanding scratches, ensuring a perfectly smooth foundation before final painting. While it provides excellent contrast, users must be careful to apply it in a well-ventilated area to manage the fine powder overspray inherent to the product.
All features
| Colour | Black |
|---|---|
| Model Part Number | GUIDE/AL-2 |
| Brand | U-Pol |
| Container Volume | 450ml |
Extended Product Information
FAQs
Does this product need to be sanded off?
Yes, you sand the area until the black powder is removed; any powder remaining indicates a low spot that requires further filling or sanding.
Can I use this over wet primer?
No, the surface must be fully dry and cured before applying the guide coat to ensure accurate results.
Will this affect the adhesion of my topcoat?
No, provided you sand the surface until the powder is gone, the remaining surface is perfectly prepared for primer or paint.
Is the black color suitable for all primers?
It is best used over light or grey primers; it will not provide enough contrast if used over a black or very dark primer.
How long does a 450ml can last?
Because it is applied as a light mist, one can covers a significant amount of surface area, lasting through multiple vehicle panel repairs.
Troubleshooting
Spray nozzle is blocked
Remove the nozzle and soak it in a solvent-based cleaner or replace it with a standard aerosol actuator.
Powder is not covering the surface evenly
Ensure the can is shaken thoroughly and increase the distance between the can and the workpiece to prevent pooling.
Powder leaves residue on the sanding block
Clean your sanding block or paper regularly; if residue builds up, it may indicate that the surface was not fully dry or cured before application.
Pros and Cons
Pros
- Prevents over-sanding of panels
- Does not load or clog sandpaper
- Provides clear visibility of high and low spots
- Quick and easy aerosol application
Cons
- Creates fine dust that requires ventilation
- Not suitable for use on very dark primers
- Requires proper masking of adjacent areas
Setup, Compatibility & Care
To prepare for use, ensure the surface is clean, dry, and free of grease or wax. Shake the 450ml aerosol can thoroughly for at least two minutes before application. Hold the can approximately 20-30cm from the surface, applying a light dusting rather than a heavy coat; a heavy coat is unnecessary and wastes material.
Compatibility: The product is compatible with most standard polyester fillers and primers.
Care: Store the can in a cool, dry place away from direct sunlight. After use, invert the can and spray for a few seconds to clear the nozzle, preventing future clogging of the actuator.