Best current price£7.66from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£7.66Visit shop Floplast Flofit+ Push Fit Flexi Hose With Tap Connector - 15Mm X 3/4Andquot; X 300Mm
Visit shop1 offer from £7.66
View price history by clicking the chart icon.
The FloPlast FloFit+ Tap Connector is designed for homeowners and professional plumbers who need a reliable, flexible solution for connecting 15mm push-fit piping to standard 3/4-inch tap outlets. This component offers the significant benefit of a 300mm flexible hose, which simplifies installations in tight or awkward spaces where rigid pipework would be difficult to maneuver; however, users should ensure the push-fit connection is fully seated to avoid potential leaks in high-pressure systems.
| Model Part Number | FH12 |
|---|---|
| Brand | FloPlast |
Yes, the FloFit+ system is designed to perform reliably in both hot and cold water plumbing and heating applications.
No specialized tools are required for the push-fit end, though a basic wrench is needed to secure the 3/4-inch connection to the tap.
Push-fit connectors are generally designed for permanent installation, though many allow for disconnection if done correctly; however, it is best practice to use a new connector for critical repairs.
It is rated for standard residential water mains pressure; please refer to the technical data sheet for specific PSI/bar ratings.
Yes, the unit comes with the necessary sealing components to connect to a standard 3/4-inch tap outlet.
Ensure the pipe is cut square and the end is deburred. Remove and re-insert the pipe, checking that it is pushed past the internal O-ring.
Verify that the rubber washer is properly seated inside the nut and ensure the connection is tightened securely with a wrench, but do not overtighten.
To install, ensure your 15mm pipe is clean, free of debris, and cut squarely with no burrs on the end. Insert the pipe firmly into the push-fit end of the connector until you feel a distinct 'click' or resistance, indicating the pipe has passed the internal O-ring seal. For the 3/4-inch end, use a suitable wrench to tighten the nut onto the tap outlet; ensure a rubber washer is correctly seated before tightening. Do not overtighten, as this can damage the internal components. For care, periodically inspect the connections during routine maintenance checks, especially if the installation is in an area subject to temperature fluctuations.
