Best current price£11.69from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£11.69Visit shop Xlr Female To 2 Rca Phono Male Y Splitter Cable Adapter Mixer Amp Audio Mic Dj 5055538124242
Visit shop
B&Q£13.29Visit shop - Xlr Female To 2 Rca Phono Male Y Splitter Cable Adapter Mixer Amp Audio Mic Dj
Visit shop3 offers from £11.69 - £13.29
View price history by clicking the chart icon.
This Loops adapter is for audio professionals and enthusiasts needing to connect stereo RCA equipment to XLR interfaces, or vice versa. Its key benefit is providing a versatile, high-quality connection for mixers, amplifiers, and microphones, improving audio signal integrity. A caveat is that it only supports unbalanced connections, limiting its use in certain professional audio setups. It features nickel-plated connectors for durability and a clean signal, and its Y-splitter design allows for easy integration into existing audio chains.
| Brand | Loops |
|---|
No, this adapter only supports unbalanced connections. It splits the signal across the RCA connectors but does not maintain a balanced signal path.
For unbalanced connections, shorter cable runs (typically under 15-20 feet) are recommended to minimize the risk of signal degradation and interference.
Yes, you can plug a microphone with an XLR output into the female XLR of this adapter, and then connect the RCA ends to RCA inputs on a mixer or amplifier. However, be mindful of the impedance and level differences, as microphones often output a mic-level signal which may require preamplification.
The adapter itself is designed for good signal transfer with its nickel-plated connectors. However, the inherent nature of unbalanced connections can make the signal more susceptible to noise and interference, especially over longer distances, which can indirectly affect perceived audio quality.
XLR Pin 2 (typically the 'hot' or positive signal for one channel) is connected to the center pin of one RCA connector. XLR Pin 3 (typically the 'cold' or negative signal for the other channel) is connected to the center pin of the other RCA connector. XLR Pin 1 (ground) is connected to the outer ring of both RCA connectors.
It can be useful for specific patching tasks, but its unbalanced nature makes it less suitable for critical balanced audio paths common in professional studios where noise rejection is paramount. It's better suited for consumer or semi-professional applications where balanced audio is not strictly required.
Ensure all connectors are firmly seated in their respective ports. Check that the adapter is oriented correctly for your desired signal flow (XLR to RCA or RCA to XLR). Verify that the source and destination devices are functioning correctly and set to the appropriate input/output.
This adapter transmits an unbalanced signal. Hum can occur due to ground loops or interference. Try using shorter cable runs. Ensure all equipment is properly grounded. Experiment with different power outlets for your audio devices.
Check the RCA connections carefully to ensure they are fully inserted and correctly paired (e.g., left RCA to left channel, right RCA to right channel, if applicable at the destination). Inspect the adapter and connected cables for any visible damage.
Setup: Simply plug the female XLR connector into your audio source or destination device and the two RCA male connectors into the corresponding RCA input or output ports on your equipment. Ensure a firm connection on all ports.
Compatibility: This adapter is designed to bridge XLR and RCA connections. It is compatible with audio equipment featuring standard XLR and RCA ports. Note that this adapter *only* supports unbalanced connections. It will not convert a balanced XLR signal to a truly balanced output via RCA, nor will it properly handle balanced signals requiring a balanced connection.
Care:
