Best current price£12.18from eBay
Shopping.co.uk recommended and popular offers
eBay£12.18Visit shop U-Pol Tiger Seal PU Adhesive Sealant |Black| 310ml *NEW*
Visit shopeBay£12.95Visit shop U-Pol Tiger Seal PU Adhesive Sealant BLACK Windows/Bond/Body Panels
Visit shop4 offers from £12.18 - £13.96
View price history by clicking the chart icon.
U-Pol Tiger Seal is a professional-grade, one-component polyurethane adhesive and sealant tailored for automotive enthusiasts and body shop professionals who require a high-strength, permanent bond for body panels and weatherproofing. It offers exceptional weather resistance and a professional black finish, though users should note that once cured, the adhesive is extremely difficult to remove, making precise application essential.
| Colour | Black |
|---|---|
| Model Part Number | TIG/NB |
| Brand | U-Pol |
While it seals well, it is primarily designed as a body panel adhesive and sealant. Always verify specific glazing requirements for windshields.
Skinning typically occurs within 30 to 60 minutes, with a full structural cure taking 24 hours or more depending on thickness and environmental conditions.
Yes, once it is fully cured, Tiger Seal can be sanded and painted with most automotive paint systems.
Tiger Seal is resistant to accidental contact with fuel, but it is not designed for direct immersion or consistent exposure to gasoline.
It is designed as a permanent bond. Removal usually requires mechanical cutting or grinding, which may damage the underlying substrate.
Ensure the nozzle tip is cut at the correct angle and size, and check that the sealant gun mechanism is functioning correctly.
Tiger Seal relies on atmospheric moisture to cure. In very dry conditions, the cure time may extend; ensure there is adequate humidity or wait for additional time.
The surface was likely contaminated with wax, silicone, or oil. Clean the area thoroughly with an automotive-grade degreaser before re-applying.
To ensure optimal performance, surfaces must be clean, dry, and free of grease or silicone residue before application. Use a standard high-quality sealant gun for dispensing. Ensure the ambient temperature is above 5°C during application to allow for proper curing. After use, seal the nozzle tip to prevent the product from curing within the cartridge. Store in a cool, dry place away from direct sunlight to maintain the product's shelf life.
