Best current price£67.31from B&Q
Shopping.co.uk recommended and popular offers
B&Q£67.31Visit shop B&Q - Fireplace Paint 1 Litre Rockingham 58 Stone Effect Heat Resistant Paint
Visit shop2 offers from £67.31 - £180.05
View price history by clicking the chart icon.
Stonelux Fireplace Paint is designed for homeowners looking to achieve an authentic stone effect on their fireplace surrounds, back panels, hearths, and inglenook recesses, especially around wood-burning stoves. Its key benefit is providing a durable, realistic stone finish at a fraction of the cost of real stone. A potential caveat is that, as with any paint, proper surface preparation is crucial for optimal results.
| Brand | Stonelux |
|---|
It is suitable for fire surrounds, back panels, hearths, inglenook recesses, and walls around gas, electric, and wood-burning stoves. It can be applied to masonry, plaster, and previously painted surfaces.
The surface must be clean, dry, and free from dust, grease, and loose debris. Light sanding may be necessary for smooth surfaces to ensure good adhesion.
This paint is designed for the visible decorative surfaces of fireplaces and stoves, not for direct application inside a chimney flue where extreme, direct combustion occurs.
Use a vacuum cleaner's brush attachment for dust. For tougher dirt, use a soft brush or sponge with mild soap and water, then rinse and dry.
The paint is quick-drying, but specific times can vary based on temperature and humidity. Always refer to the product's specific instructions for recoating times. Allow ample time for full curing before heavy use or intense cleaning.
As a water-based paint, it has a lower odor compared to solvent-based alternatives, but good ventilation is always recommended during application and drying.
Generally, two coats are recommended for an even and durable finish. However, this can vary depending on the surface and the desired stone effect intensity.
Ensure the surface was properly cleaned, dry, and free from any contaminants before application. Lightly sand very smooth surfaces. Stir paint thoroughly.
Apply thin, even coats. Ensure you are using a suitable brush, roller, or spray technique. Allow sufficient drying time between coats as per manufacturer instructions.
This may indicate excessive heat exposure beyond the paint's rating or inadequate surface preparation. Ensure the area is suitable and the surface was correctly prepared and dry.
Ensure the paint has fully cured (allow several days to a week after application). Use only mild soap and water with a soft brush or sponge. Avoid abrasive cleaners.
Setup: Ensure the surface is clean, dry, and free from dust, grease, and any loose material. Sanding lightly may be required for very smooth surfaces to improve adhesion. Stir the paint thoroughly before application.
Compatibility: Suitable for use on masonry, plaster, previously painted surfaces, and certain heat-resistant boards. It is designed for fireplaces, fire surrounds, back panels, hearths, inglenook recesses, and walls around gas, electric, and wood-burning stoves. Always test on an inconspicuous area first if unsure.
Care: Once fully cured, the painted surface can be cleaned. For routine dusting, use a vacuum cleaner with a brush attachment. For more stubborn dirt or marks, use a soft brush or sponge with mild soap and water. Rinse with clean water and allow to dry. Avoid abrasive cleaners or harsh scrubbing.
