Samsung Bespoke Jet Lite Cordless Vacuum Cleaner - Santorini Beige

It's recommended to empty the dustbin after each use. The dustbin and cyclone system can be washed when needed, typically once a month or if visibly dirty. Washable filters should also be cleaned regularly, ensuring they are completely dry before reinstallation. Check the LCD display for specific cleaning alerts.

The vacuum provides up to 60 minutes of runtime on a single battery at the lowest power setting. For extended cleaning sessions, a spare battery can be used, providing up to 2 hours of total cleaning time.

The Clean Station automatically empties the vacuum's dustbin using 'Air Pulse' technology when you dock the vacuum. It hygienically collects 99% of hair and 99.999% of fine particles, and also charges the vacuum simultaneously.

No, the Samsung Bespoke Jet Lite is designed for dry cleaning only and should not be used on wet floors or to pick up liquids.

The battery takes approximately 3.5 hours to fully charge.

The vacuum cleaner comes with a 5-year warranty. The removable battery has a 2-year warranty and is designed to retain 70% of its original performance for up to 500 cycles.

Yes, the telescopic pipe is adjustable to four different lengths, allowing users to customize the vacuum's height for comfortable use and easier reach.

AI Cleaning Mode 2.0 intelligently detects different floor types and environments, automatically adjusting suction power and brush speed for optimal cleaning performance and up to 21% power saving. It enhances maneuverability by up to 8%.

Ensure the battery is charged and properly inserted. Check if the charging contacts are clean. Try charging with a different battery if available.

Check if the dustbin is full and empty it. Clean or wash the dustbin, filters, and cyclone system if they are clogged. Inspect the brush head and pipe for any blockages.

This may indicate an overheating issue or a depleted battery. Allow the vacuum to cool down if it feels hot. Ensure the battery is charged. Check for blockages that might cause the motor to strain.

Verify the charging station is plugged in and functional. Clean the charging contacts on both the vacuum and the station. Ensure the battery is correctly aligned in the charging cradle.

Ensure the Slim LED Brush+ is attached for AI mode to function correctly. Check for debris or tangled hair in the brush that might impede sensor function. Update the vacuum's firmware via the SmartThings app if available.