V-jaw Locking Pliers - 225mm (9in)

The maximum jaw opening is determined by the overall size and design, but the throat depth is 47mm. For precise opening capacity, refer to the product specifications if available or measure the maximum distance between the jaws when fully opened.

While the pliers provide a strong grip, direct contact with extreme temperatures can be hazardous and damage the tool. Use appropriate protective gear and avoid prolonged exposure to extreme heat or cold.

The jaws are forged and machined for durability, typically made from high-grade steel. The body is chrome-plated for corrosion resistance.

The wire cutter is designed for common electrical wire gauges. It may not be effective for hardened steel wire, cable, or very thick conductors.

The knurled screw located at the base of the handle is used to adjust the clamping pressure. Turn it clockwise to increase pressure and counter-clockwise to decrease it.

The overall length of these V-jaw locking pliers is 225mm (9 inches).

Replacement parts such as jaws or springs are generally not available for this type of locking plier. The tool is designed as a single unit.

Ensure the knurled screw is fully tightened. Check for any debris or damage in the jaw mechanism or screw thread that might be preventing a proper lock. Clean and lubricate the screw mechanism.

Clean any dirt or debris from the release lever and pivot points. Apply a penetrating lubricant to the mechanism and work the lever back and forth until it moves freely.

Inspect the jaws for any bending or damage. Minor misalignment may sometimes be corrected by careful adjustment of the locking screw, but significant damage may require replacement of the tool.

Ensure you are attempting to cut wire within the cutter's capacity. Clean any debris from the cutter blades. If the blades are nicked or dull, they may require professional sharpening or tool replacement.