Shopping.co.uk

Rivets - Silver - PR112

Rivets - Silver - PR112

100x Rivets Alu Standard Flange 6.4 X 12 mm DIY Workshop Tool. This product offers an extensive pr...

Best current price£16.67from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £16.67 - £21.58

View price history by clicking the chart icon.

eBay100x Rivets Alu Standard Flange 6.4 X 12 mm DIY Workshop Tool - PR112
Free delivery in 1–3 days
£16.67
Visit shop
B&QB&Q - Rivet Aluminium 6.4 X 12mm Standard Flange Pr112 Pack Of 100
Free delivery in 1–3 days
£21.58
Visit shop

Product Information

Full details

This guide is for DIY enthusiasts and professionals needing reliable fasteners for general maintenance and assembly. The key benefit is the pack's convenience and suitability for various workshop tasks. A caveat is that these are standard flange rivets, which may not be suitable for heavy-duty structural applications. These 6.4 x 12 mm aluminum rivets are designed for use with a rivet gun and offer a secure, permanent fastening solution for different materials.

All features

ColourSilver
Model Part NumberPR112
BrandMehr

Extended Product Information

FAQs

What size drill bit should I use for these rivets?

For 6.4 mm (1/4") rivets, a drill bit size typically around 6.4 mm to 6.6 mm is recommended. Always check the specific recommendations for your rivet gun and the materials you are joining.

Can these rivets be used outdoors?

Yes, aluminum rivets offer good resistance to corrosion, making them suitable for outdoor applications. However, for highly corrosive environments, stainless steel rivets might be a better choice.

What is the difference between standard flange and other flange types?

Standard flange rivets (like these) have a flat head that sits flush. Other types, like large flange or dome head, offer different load distribution or finishing characteristics.

How many rivets are in this pack?

This pack contains 100 rivets.

Can I use these for structural applications?

These are standard rivets for general purposes. For heavy-duty structural applications, specialized rivets and engineering considerations are usually required.

What tools do I need to use these rivets?

You will need a rivet gun (manual or pneumatic) that is compatible with 6.4 mm diameter rivets.

Troubleshooting

Rivet gun fails to break the mandrel

Ensure the rivet gun is correctly set up for 6.4 mm rivets and that the jaws are clean and in good condition. Check if the rivet gun has sufficient power for the material thickness.

Rivet does not secure materials properly

Verify that the drilled hole size is appropriate for the rivet. Ensure the combined thickness of the materials is within the rivet's working range. Check that the rivet gun is squeezing with enough force.

Mandrel breaks too early or too late

This may indicate an issue with the rivet gun's adjustment or worn jaws. Consult your rivet gun's manual for calibration or adjustment procedures.

Pros and Cons

Pros

  • Convenient pack size for common DIY tasks.
  • Aluminum material offers good durability and rust resistance.
  • Standard size is compatible with most common rivet guns.
  • Provides a permanent and secure joint.

Cons

  • Not suitable for extremely high-strength structural applications.
  • Requires a separate rivet gun tool for installation.
  • May not be ideal for materials requiring a very wide load distribution.

Setup, Compatibility & Care

Setup:

  1. Ensure you have a suitable rivet gun compatible with 6.4 mm (1/4") diameter rivets.
  2. Drill a hole through the materials to be joined. The hole diameter should typically match the rivet's mandrel diameter (approximately 3.2 mm for a 6.4 mm rivet, but check tool/rivet specifications).
  3. Insert the rivet into the drilled hole.
  4. Place the rivet gun nose onto the rivet head and the mandrel into the gun's jaws.
  5. Squeeze the rivet gun handles firmly and repeatedly until the mandrel breaks off, securing the materials.

Compatibility:

  • These rivets are designed for use with standard manual or pneumatic rivet guns that accommodate 6.4 mm diameter rivets.
  • Suitable for joining aluminum, thin steel, plastic, and wood (when pilot holes are used).

Care:

  • Store rivets in a dry place to prevent oxidation, although aluminum offers good corrosion resistance.
  • Keep the packaging intact to prevent loss or contamination.

Price History

DatePrice
Visit shop