Niagara Conservation Showerhead - Chrome
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners looking to reduce water consumption without sacrificing shower experience. The Niagara Conservation Earth Luxe High Efficiency Showerhead offers significant water savings (up to 40% more than standard low-flow options) with its 1.5 GPM flow rate, while providing consistent pressure and multiple spray settings. A potential caveat for some users might be the transition to a lower flow rate compared to older, less efficient showerheads.
All features
| Model Part Number | N3915CH |
|---|---|
| Brand | Niagara Conservation |
Extended Product Information
FAQs
What is the GPM (gallons per minute) of this showerhead?
The Niagara Conservation Earth Luxe High Efficiency Showerhead has a flow rate of 1.5 GPM, which is significantly lower than the standard 2.5 GPM of older showerheads.
How do I change the spray settings?
You can change the spray settings by simply twisting the faceplate of the showerhead. It offers three distinct modes: needle, massage, and combination.
Will this showerhead really save me money?
Yes, by using up to 40% less water than standard showerheads, it can lead to noticeable savings on your water and energy bills over time.
Is this showerhead difficult to install?
No, it's designed for easy DIY installation and fits standard US shower arms (1/2" IPS connection). Basic tools like plumber's tape might be needed.
What material is the showerhead made of?
The showerhead features a durable, corrosion-resistant ABS thermoplastic body with a sleek chrome finish.
Does the water pressure remain consistent?
Yes, it features a patented flow compensator that ensures consistent and smooth water flow, even if your home's water pressure fluctuates.
Is this product WaterSense certified?
Yes, this showerhead is WaterSense certified, meeting EPA criteria for water efficiency and performance.
Troubleshooting
Low water pressure
Ensure the showerhead is securely attached and that there are no kinks in the shower hose (if applicable). Check for any debris lodged in the connection point or shower arm. Verify that the main water supply to your home is fully open.
Uneven spray pattern
Mineral deposits may be blocking some nozzles. Gently rub the flexible nozzles with your finger or a soft brush. For stubborn buildup, refer to the 'Care' section for cleaning instructions.
Dripping after shut-off
This can sometimes occur with high-efficiency showerheads. Ensure the showerhead is not overtightened, which can damage seals. If dripping persists, check internal components or consider consulting a plumber.
Difficulty switching spray modes
Ensure you are twisting the faceplate of the showerhead firmly in either direction. If it feels stiff, a small amount of silicone lubricant (safe for plumbing) applied to the rotating mechanism might help, but allow it to dry completely before use.
Pros and Cons
Pros
- Significant water savings leading to lower bills
- Maintains consistent water pressure
- Multiple spray options for a customizable experience
- Durable and attractive chrome finish
- Environmentally friendly design
Cons
- May require adjustment for users accustomed to higher GPM showerheads
- ABS thermoplastic, while durable, may feel less premium than metal alternatives to some
- Limited to three spray patterns, fewer than some high-end models
Setup, Compatibility & Care
Setup:
- Unscrew your old showerhead from the shower arm.
- Clean any residue from the shower arm threads.
- Apply plumber's tape (not included) to the shower arm threads for a secure seal.
- Screw the Niagara Conservation Earth Luxe showerhead onto the shower arm clockwise.
- Hand-tighten, and then use a wrench for a final quarter-turn if needed. Do not overtighten.
Compatibility:
This showerhead is designed to fit standard US shower arms (1/2" IPS connection).
Care:
To maintain the chrome finish and optimal performance:
- Wipe the showerhead clean with a soft, damp cloth.
- Avoid using abrasive cleaners or scouring pads, as they can damage the finish.
- Periodically check the spray nozzles for any mineral buildup. You can often clear these by gently rubbing the flexible nozzles with your finger or a soft brush. If buildup is significant, you can soak the showerhead (after removal) in a 50/50 solution of white vinegar and water for a few hours, then rinse thoroughly.