Best current price£78.53from eBay
Shopping.co.uk recommended and popular offers
eBay£78.53Visit shop John Guest Speedfit Brass Manifold 15mm X 3/4"" - JGMAN2
Visit shop
Debenhams£81.16Visit shop John Guest Unisex Gold Brass Manifold 15Mm X 3/4" 2 Port In Size 3
Visit shop4 offers from £78.53 - £83.81
View price history by clicking the chart icon.
The JG Speedfit 2 Port Brass Water Manifold is designed for plumbers and DIY enthusiasts needing to centralize water distribution by splitting a main supply into reduced outlets. Its key benefit is a significantly faster and tool-free installation compared to traditional methods, especially in tight spaces. A caveat to note is its unsuitability for central heating systems. This brass, nickel-plated manifold offers instant push-fit connections and is manufactured in the UK.
| Brand | JG Speedfit |
|---|
The JG Speedfit 2 Port Brass Manifold is used to split a single main water supply into two separate, reduced outlet feeds, simplifying plumbing runs.
No, this manifold is specifically designed for domestic hot and cold water distribution and is not suitable for central heating systems.
It is compatible with 15mm Speedfit PEX and polybutylene plastic pipes (using inserts), as well as 15mm copper pipes.
No, installation is designed to be tool-free. Connections are made using a simple push-fit mechanism that can be demounted by pressing the collet.
Push the pipe fully into the fitting until it stops. The internal 'Grip & Seal' collet with stainless steel teeth will grip the pipe, and the O-ring provides a primary seal.
The manifold has two outlet connections with 3/4" BSP male threads.
The JG Speedfit brass manifold is designed, manufactured, and assembled in the UK.
Ensure the pipe is fully inserted into the push-fit fitting. Check the pipe end is cut square and free from damage. If using plastic pipe, verify the correct insert is used and the pipe is properly supported.
Confirm the pipe is not kinked or deformed. Ensure no debris is present inside the fitting. For plastic pipes, ensure they are properly inserted to the depth required.
Push the collet firmly towards the body of the push-fit fitting while simultaneously pulling the pipe outwards.
Check that the manifold is not the bottleneck; ensure the main supply pressure is adequate. Verify that the outlet connections are not restricted.
Setup:
Compatibility:
Care:
