Best current price£33.82from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£33.82Visit shop Draper 25994 Twin And Triple Leg Reversible Puller 78Mm Reach X 100Mm Spread Each
Visit shop
B&Q£42.09Visit shop B&Q - Twin And Triple Leg Reversible Puller78mm Reach X 100mm Spread 25994
Visit shop28 offers from £33.82 - £69.99
View price history by clicking the chart icon.
This Draper Twin and Triple Leg Reversible Puller is for mechanics and DIY enthusiasts needing to remove gears, bearings, and other press-fit components. Its key benefit is versatility, allowing both internal and external pulling with adjustable leg configurations. A potential caveat is the need for careful selection of reach and spread for specific tasks.
| Model Part Number | 56177 |
|---|---|
| Brand | Draper |
The specific model mentioned has a reach of 150mm and a spread of 100mm. A related model (Draper 25994) offers a 78mm reach and 100mm spread.
Yes, the legs are reversible, allowing for both internal and external pulling applications.
The legs, yoke, and thrust bolt are forged from carbon steel for durability. The screw has a rolled thread with a chemically blackened finish.
The puller comes with interchangeable yokes. You can attach either the twin yoke (for two legs) or the triple yoke (for three legs) to the main body.
The dimensions are approximately 30.20cm x 16.60cm x 4.20cm, and it weighs 1.81kg.
It is recommended to clean the puller after use and apply a light coat of oil to the screw threads to prevent rust and ensure smooth operation.
Ensure the legs are positioned correctly for the task (internal vs. external). Verify that the component has a lip or surface for the legs to grip securely. For internal pulling, ensure the legs are firmly seated within the component.
Check for debris or damage on the screw threads. Clean the threads and apply a small amount of lubricating oil. Ensure the legs are evenly applied to the component to avoid binding.
Verify that the puller's capacity is not exceeded. Ensure the load is distributed evenly across all legs. Re-assess if the component being removed is excessively seized, which may require additional force or a different tool.
Setup: To set up the puller, select the appropriate yoke (twin or triple) and attach it to the main body. Then, attach the legs to the yoke, ensuring they are securely fastened. Adjust the legs to the desired configuration (internal or external) and set the reach. Place the puller's center tip against the component to be removed and turn the thrust bolt clockwise to apply pressure.
Compatibility: This puller is designed to work with components such as gears, bearings, pulleys, and flywheels that have suitable surfaces for gripping. Its effectiveness depends on the accessibility and shape of the component being worked on.
Care: After use, clean the puller with a dry cloth to remove any grease or debris. Apply a light coat of oil to the screw threads to prevent rust and ensure smooth operation for future use. Store in a dry environment.
