38mm 6 Point Lower Ball Joint Socket - Loops - 38mm 6 Point Lower Ball Joint Socket

This socket is designed for specific lower ball joint applications on Citroen, Peugeot, and Toyota vehicles. It is recommended to verify your vehicle's service manual for precise compatibility.

The pass-through design means the center of the suspension joint can pass through the body of the socket. This provides better access and makes the removal/installation process easier, especially in confined spaces.

The product description indicates a 'hex drive,' implying it connects to a standard hex-shaped tool. The specific size of the hex drive adapter needed will depend on the tool you use (e.g., 1/2" drive breaker bar with a hex adapter).

No, this socket is specifically a 38mm 6-point tool for lower ball joints on certain Citroen, Peugeot, and Toyota models. It is not a universal ball joint socket.

After use, wipe the socket clean with a cloth to remove dirt and grease. Store it in a dry place to prevent corrosion. Avoid using abrasive cleaners.

Yes, provided you use an appropriate hex adapter and the impact wrench is suitable for the size of the hex drive. However, always use caution and follow torque specifications.

Verify that the vehicle is a compatible model (Citroen, Peugeot, Toyota) and that this specific 38mm size is correct for your application. Check for any debris in the socket or on the nut.

Ensure the correct size hex drive tool is used and that it is fully seated in the socket. Check for obstructions around the ball joint or any damage to the socket's internal hex.

Confirm that the socket is a 6-point design and that the nut has not been rounded. Ensure firm, even pressure is applied during use. If the nut is damaged, it may require alternative removal methods.