Best current price£299.89from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£299.89Visit shop VOLTCRAFT DPPS-32-15 Bench Mount PSU 1-32 VDC 15A 480W
Visit shop9 offers from £299.89 - £389.96
View price history by clicking the chart icon.
The VOLTCRAFT DPPS-60-10 is a versatile bench mountable laboratory power supply unit designed for operating low-voltage consumables. It offers adjustable DC voltage and current with precise control via digital rotary encoders and a clear LCD display. While it provides both front panel (5A max, overload protected) and rear panel high-current outputs, users should note the front panel's 5A limitation and ensure proper connection types for the desired output. Key features include constant power operation and three programmable memory slots for quick access to common settings.
| Model Part Number | DPPS-60-10 |
|---|---|
| Brand | VOLTCRAFT |
The rear panel can output up to the full nominal current rating of the device, which is 10A. However, the total current drawn from both front and rear outputs combined cannot exceed 10A.
Yes, you can use both outputs simultaneously, but the total current drawn from both must not exceed the unit's maximum capacity (10A). The front output is still limited to 5A.
The constant power limit can be pre-set through the digital controls. Refer to the operating instructions for the specific sequence of button presses and rotary encoder adjustments required to set the power limit without needing a shorting bar.
The front panel uses standard 4mm safety sockets (banana plugs). The rear panel uses high current socket screw connectors, requiring compatible connectors for connection.
The DPPS-60-10 features three freely programmable memory slots where you can save different fixed voltages and current limitations for quick recall.
Yes, the DPPS-60-10 serves as a potential-free DC voltage source, meaning its output is isolated from the mains input.
The package includes the Voltcraft DPPS-60-10 unit, a power cord, a connector for remote connection, a 1.5m USB cable, a software CD, and the operating instructions.
Ensure the power cord is securely connected to both the PSU and the mains outlet. Verify the mains outlet is functional by testing with another device. Check the main power switch on the PSU.
Confirm that the output terminals are correctly connected to your load. Check that the voltage and current are set appropriately and that the output is enabled (if applicable via a switch or software). Ensure the load is not short-circuited.
The connected load is drawing more than 5A. Reduce the current limit setting on the PSU or use the rear panel output for loads requiring more than 5A. Check the connected device for a short circuit.
Ensure the display is clean. If persistent, recalibration might be needed; consult the full operating manual. Verify connections to the load are secure.
Verify the USB cable is properly connected at both ends. Ensure the correct drivers are installed from the provided CD. Check that the device is powered on and the software is configured to recognize the correct COM port.
Setup:
Compatibility:
Care:
