Best current price£34.00from Farrow & Ball
Shopping.co.uk recommended and popular offers
Farrow & Ball£34.00Visit shop Farrow & Ball Middleton Pink 750 ml Dead Flat No. 245
Visit shop5 offers from £34.00 - £132.00
View price history by clicking the chart icon.
This guide is for homeowners and decorators seeking a sophisticated, vintage-inspired finish for interior walls and woodwork. The Farrow & Ball Dead Flat paint in Middleton Pink offers a uniquely flat, durable, and scuff-resistant coating with a delicate pastel hue. A key caveat is that Archive colours, like Middleton Pink, are made to order and therefore non-returnable.
| Colour | Pink |
|---|---|
| Model Part Number | No. 245 |
| Brand | Farrow & Ball |
The Dead Flat finish has an exceptionally low sheen (typically 2%), meaning it reflects very little light. This gives it a unique, chalky, and velvety appearance that is highly sought after for a sophisticated matte look.
No, the Farrow & Ball Dead Flat paint is specifically designed for interior use only. It is not formulated to withstand exterior weather conditions.
Archive colours are mixed to order specifically for your purchase. This made-to-order process means they cannot be returned or exchanged unless they are faulty.
For best results and optimal colour depth, two coats of Farrow & Ball Dead Flat paint are generally recommended. Ensure proper preparation and priming of the surface beforehand.
Drying times can vary, but typically, the paint is touch dry in 2-4 hours. It is advisable to wait at least 4 hours between coats, and longer in cooler or more humid conditions.
While it is wipeable, the Dead Flat finish is best suited for lower-moisture areas like living rooms and hallways. For high-moisture areas, Farrow & Ball's Modern Emulsion or Estate Eggshell finishes might be more appropriate due to their enhanced durability and moisture resistance.
Use a soft cloth or sponge slightly dampened with water. For stubborn marks, a very mild detergent can be used, but always rinse with clean water and dry gently. Avoid abrasive cleaners.
Ensure you are working to a "wet edge", meaning you overlap each freshly painted section before it dries. Apply paint evenly and avoid over-brushing. Ensure adequate lighting to see where you have applied paint.
Ensure the surface was properly prepared and primed. Lightly sand between coats if necessary. Check that you have applied an even number of coats and avoided excessive build-up.
Colours can appear differently depending on lighting conditions and surrounding colours. Check the paint swatch against your chosen complementary colours in your room's natural and artificial light. Remember this colour is from the Archive and made to order.
Ensure the paint has been stored correctly. If it seems very thick, a small amount of the appropriate Farrow & Ball thinner might be added, but follow manufacturer guidelines precisely. Stir vigorously to ensure all pigment is incorporated.
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and loose paint. Fill any cracks or imperfections and sand smooth. For previously painted surfaces, a light sanding may be required. Prime bare plaster or new woodwork with a suitable Farrow & Ball primer and undercoat.
Compatibility: This paint is designed for interior use on walls, ceilings, woodwork, and metal. Ensure compatibility with existing coatings; if unsure, test in an inconspicuous area.
Application: Stir the paint thoroughly before and during use. Apply using a good quality brush or roller. Two coats are typically recommended for best results. Allow adequate drying time between coats, as indicated on the tin.
Care: The Dead Flat finish is scuff-resistant and wipeable. To clean, use a damp, soft cloth or sponge with a mild detergent if necessary. Avoid abrasive cleaners or excessive scrubbing, which can damage the delicate finish.
