Best current price£96.49from eBay
Shopping.co.uk recommended and popular offers
eBay£96.49Visit shop Bearing Press 26pc Universal Press & Pull Sleeve Bush Bearing Seal Set
Visit shop2 offers from £96.49
View price history by clicking the chart icon.
This guide is designed for mechanics, technicians, and DIY enthusiasts who need to efficiently remove and install bushes, bearings, and seals in various vehicles. The Neilsen CT3187 kit offers a comprehensive solution with a wide range of sleeve sizes and pulling spindles, streamlining maintenance tasks. However, it's essential to select the correct sleeve size for each application to avoid damaging components.
| Model Part Number | CT3187 |
|---|---|
| Brand | Neilsen |
The kit is designed to be compatible with a wide range of vehicles, but compatibility depends on the specific component sizes. It's best to check your vehicle's specifications or measure the component before use.
Measure the outer diameter of the bearing, bush, or seal, and select the sleeve with an inside diameter that closely matches. The sleeve should fit snugly but not forcefully.
Yes, this kit can be used on various types of bearings, including wheel bearings, suspension bushings, and silent blocks, as long as the sleeve size is appropriate.
Clean the sleeves and spindles after each use, lubricate the threads, and store the kit in a dry place. Inspect the components regularly for wear or damage.
Try applying penetrating oil, and gently tap the sleeve to loosen it. Ensure the alignment is correct, and avoid excessive force to prevent damage.
If the threads on the spindle get damaged, replace it with a new one from the kit or contact the supplier for a replacement.
Yes, this kit is designed for both removing and installing bushes, bearings, and seals.
Select a smaller sleeve size or check the component dimensions against the sleeve sizes provided in the kit.
Ensure the sleeve and spindle are correctly aligned. Apply more force gradually, and check for any obstructions.
Replace the damaged spindle with a new one from the kit or contact the supplier for a replacement.
Use a penetrating lubricant and gently tap the sleeve or spindle with a hammer to loosen it. Ensure alignment is correct.
Setup:
Compatibility:
Care:
