Maple Flat Head Cross Grain Plug - 1 inch - 25.4mm - Pack of 25
Best current price£18.75from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£18.75Visit shop - Oakcrafts1"25.4mm Maple Flat Head Cross Grain PlugPack Of 25
Visit shopB&Q£18.75Visit shop One Offer
1 offer from £18.75
View price history by clicking the chart icon.
B&Q - Oakcrafts1"25.4mm Maple Flat Head Cross Grain PlugPack Of 25
Free delivery in 1–3 days
£18.75
Visit shop
Product Information
Full details
The Oakcrafts Maple Flat Head Cross Grain Plug is an essential tool for professional woodworkers and DIY furniture makers looking to conceal screw heads with a clean, seamless finish. These 1-inch plugs offer a near-invisible look that integrates perfectly into maple surfaces, though they require careful sanding to achieve a truly flush result with the surrounding grain.
All features
| Brand | Oakcrafts |
|---|
Extended Product Information
FAQs
Can these plugs be used with woods other than maple?
While intended for maple, they can be stained to match other light-colored woods, though the grain pattern may vary.
Do these plugs come pre-finished?
No, these are raw wood plugs designed for you to apply your own stain or finish to match your specific project.
What is the exact diameter of the plug?
Each plug is designed to fit a 1-inch (25.4mm) pre-drilled hole.
How many plugs are in one package?
Each pack contains 25 individual maple plugs.
Should I use a specific type of glue?
Standard wood glue (PVA glue) is typically sufficient for a strong and permanent bond.
Can these be used outdoors?
These are intended for interior furniture making. If used outdoors, you must ensure you use a waterproof wood glue and an exterior-grade finish to protect the maple.
Troubleshooting
Plug sits too deep in the hole
Place a small amount of wood filler or a thin veneer shim at the bottom of the hole to elevate the plug before gluing.
Plug is loose after insertion
Apply a thicker wood glue or a small sliver of paper or thin wood veneer around the edge of the plug to create a tighter interference fit.
Visible gap between plug and wood
Carefully sand the surrounding area to create fine maple dust, mix this dust with wood glue, and use it as a putty to fill the micro-gap before final finishing.
Pros and Cons
Pros
- Near-invisible integration with maple furniture
- Easy to sand and finish
- Cross-grain design accepts wood stain naturally
- Provides a professional, clean look to joinery
Cons
- Requires precise drilling to ensure a tight fit
- Limited to 1-inch hole diameters
- Requires manual sanding to achieve a perfectly flush finish
Setup, Compatibility & Care
To ensure the best results, use a high-quality wood glue appropriate for your project. Because these plugs are made from natural maple, they will react to humidity and environmental changes just like the rest of your furniture.
- Compatibility: Compatible with most wood glues and standard woodworking stains.
- Storage: Store in a cool, dry place to prevent the maple from warping or absorbing excess moisture before use.
- Maintenance: Once installed and finished, treat the plugs as you would the surrounding timber. If you use a penetrating oil finish, apply it generously to the plug as it may be more porous than the surrounding solid wood.