Lightweight, compact and portable shot blasting kit suitable for the removal of paint, rust, burrs...Lightweight, compact and portable shot blasting kit suitable for the removal of paint, rust, burrs, dirt from metals and marks from brick and stone. It features a large capacity hopper with a carry handle and integral hose storage, and includes a PVC 4.5m grit hose. This kit is supplied with a shot blasting gun and a 1/4" BSP connector. The operating pressure ranges from 50-120 psi, with a capacity of 22kg and a net weight of 2kg. The overall dimensions are H30 x W29.4 x D54.8cm, and it weighs 2.44kg.
Draper Portable Shot Blasting Kit, 120 Max Psi, 22Kg CapacityFree delivery in 1–3 days£64.99Visit shop →
Product Information
Full details
This guide is for anyone looking to remove paint, rust, or other imperfections from metal, brick, or stone surfaces using the Draper Portable Shot Blasting Kit. The kit offers a lightweight and portable solution for surface preparation, offering a convenient way to tackle a variety of projects. Keep in mind that this kit requires an air compressor for operation.
All features
Model Part Number
53008
Brand
Draper
Extended Product Information
FAQs
What type of air compressor is required?
You need an air compressor capable of delivering between 50-120 psi.
What type of abrasive media should I use?
Use abrasive media suitable for the material you are working on, such as sand, glass beads, or aluminum oxide.
How do I store the shot blasting kit?
Empty the hopper, clean the unit, and store it in a dry place.
What safety precautions should I take?
Always wear eye protection, a respirator, and gloves when operating the blaster. Work in a well-ventilated area.
What is the capacity of the hopper?
The hopper has a 22kg capacity.
What are the dimensions of the kit?
The overall dimensions are H30 x W29.4 x D54.8cm.
Troubleshooting
Blaster is not working.
Check the air compressor is turned on and providing the correct pressure. Ensure all connections are secure and there are no blockages in the hose or nozzle.
Poor blasting performance.
Check the blasting media for moisture or clumping. Adjust the air pressure within the recommended range. Ensure the nozzle is not worn or blocked.
Blaster is leaking media.
Check all seals and connections for any leaks. Tighten connections if necessary. Check the hopper lid for a proper seal.
Pros and Cons
Pros
Lightweight and portable design for easy maneuverability.
Large capacity hopper minimizes the frequency of refills.
Suitable for various materials including metal, brick, and stone.
Comes with essential accessories for immediate operation.
Compact dimensions allow for easy storage when not in use.
Cons
Requires an air compressor for operation.
Operating pressure range must be adhered to for optimal performance (50-120 psi).
May require additional safety gear such as a mask and gloves.
The 22kg capacity may not be sufficient for very large projects.
Grit not included, must be purchased separately.
Setup, Compatibility & Care
Setup: Connect the 1/4" BSP connector to your air compressor. Attach the grit hose to the blaster. Fill the hopper with the appropriate blasting media.
Compatibility: Ensure your air compressor can provide the necessary pressure within the 50-120 psi range. Use appropriate abrasive media suitable for the material being blasted.
Care: After each use, empty the hopper and clean the unit. Store the kit in a dry place. Regularly check the hose for wear and tear, and replace if necessary. Avoid using the kit in wet conditions.