Nova Wax Lamp - Purple - Yellow Wax - 15 Inch

Typically, the Nova Wax Lamp requires 1 to 3 hours to fully heat up and for the wax to begin flowing smoothly. The exact time can depend on the ambient room temperature.

While wax lamps are designed for extended use, it's generally recommended not to leave them on for more than 8-10 hours at a time to prolong bulb life and prevent potential overheating. Always turn it off when unsupervised or when leaving the house.

Info needed: [Please refer to the lamp's base or packaging for the specific bulb type and wattage required for your Nova Wax Lamp model.]

If the lamp was shaken while warm, the wax may break down and cause cloudiness. In some cases, allowing the lamp to cool and rest undisturbed for several days can help it clear up, but severe cloudiness may be permanent. Avoid shaking the lamp.

The lamp contains glass and can become hot during operation. It should be placed on a stable surface out of reach of young children and pets to prevent burns, breakage, or accidental ingestion of the liquid. Adult supervision is recommended.

Always unplug the lamp and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe down the exterior base and cap. For the glass globe, you can use a small amount of glass cleaner on the outside only, being careful not to get any cleaner into the lamp's interior liquid.

First, ensure the lamp has had sufficient time to heat up. Check if the bulb is working and is the correct wattage. If the room is too cold, the wax may not flow effectively. If these don't resolve the issue, the bulb may need replacement.

Ensure the lamp has been on for at least 1-3 hours to fully heat up. Check that the room temperature is not too cold (optimal is 20-25°C). Verify the bulb is the correct wattage and functioning properly, providing enough heat. Avoid placing the lamp in drafts.

Check if the power cord is securely plugged into both the lamp and the wall outlet. Test the outlet with another device to ensure it's functional. Inspect the bulb to see if it's securely screwed in and not burnt out; replace if necessary.

Cloudiness can occur if the lamp has been shaken or if the wax has been severely overheated or cooled too rapidly. Allow the lamp to rest unplugged and undisturbed for several days in a stable room temperature. Some cloudiness might clear up naturally, but severe clouding may be permanent. Avoid shaking the lamp, especially when warm.

This can happen if the lamp is not level or if it's been moved while warm. Unplug the lamp and allow it to cool completely and settle on a stable, level surface. Plug it back in and allow it to heat up fully.

It is normal for wax lamps to become warm during operation due to the heat required to melt the wax. However, if it feels excessively hot, ensure it's placed in a well-ventilated area and not enclosed. Always handle with care and keep out of reach of children and pets.