Liqui Moly Motor Oil Saver Treatment Stop Smoke Rubber Seal - 6x300Ml
Motor Oil Saver Regenerates engine seals made of rubber and plastic such as shaft sealing rings, v...Motor Oil Saver Regenerates engine seals made of rubber and plastic such as shaft sealing rings, valve stem seals and prevents oil patches under the vehicle. Counteracts oil dilution. Reduces engine noise and oil consumption via piston rings and valve guides. Suitable for all commercially available motor oils in gasoline and diesel engines with and without a diesel particulate filter (DPF). Tested for turbochargers and catalytic converters. Contents sufficient to treat up to 5 liters of motor oil. Sealing after a mileage of 600 – 800 km. Not suitable for motorbikes with a wet clutch. Reduce engine noise, maintains and regenerates rubber and plastic seals, reduces oil consumption, prevents oil leaks and pollution of the environment, prevents smoking. Application: One 300 ml can is sufficient to treat up to 5 liters of motor oil. The product can be added at any time. After adding, run the engine until warm. Sealing first takes effect after about 600 - 800 km. To guarantee a lasting effect, we recommend adding the product again after every 30,000 km as a preventative measure.
This Liqui Moly Motor Oil Saver is designed for vehicle owners experiencing oil leaks or excessive smoke from their engines due to worn rubber and plastic seals. Its key benefit is regenerating these seals to prevent oil patches and reduce oil consumption, with a caveat that it is not suitable for motorcycles with wet clutches. The product counteracts oil dilution, reduces engine noise, and is compatible with all common motor oils in gasoline and diesel engines, including those with diesel particulate filters.
All features
Model Part Number
1802
Brand
Liqui Moly
Extended Product Information
FAQs
How long does it take for the product to work?
The sealing effect typically becomes noticeable after driving approximately 600 to 800 kilometers.
Can I use this product in my motorcycle?
No, this product is not suitable for motorcycles equipped with a wet clutch, as it can interfere with clutch operation.
How often should I use this treatment?
For a lasting effect and preventative maintenance, it is recommended to add the product again after every 30,000 kilometers.
Is this product safe for turbocharged engines?
Yes, it has been tested and is safe for use in engines with turbochargers.
Can I mix this with different types of motor oil?
Yes, it is suitable for all commercially available motor oils in gasoline and diesel engines.
What should I do if I accidentally put it in a motorcycle with a wet clutch?
If this product has been added to a motorcycle with a wet clutch, it is advisable to perform an oil change immediately to avoid potential clutch slippage.
Will this product fix severely damaged seals?
This product is designed to regenerate and maintain seals. For severely damaged or torn seals, mechanical replacement may still be necessary.
Troubleshooting
Engine continues to leak oil after treatment
Ensure the correct dosage was used and allow the full 600-800 km for the seals to regenerate. If leaks persist, the seals may be excessively damaged and require mechanical replacement.
Engine smoke has not reduced
Verify that the smoke is indeed caused by oil consumption related to seal issues. Other causes for smoke may require different solutions. Allow the full regeneration period.
No noticeable reduction in engine noise
Engine noise can have multiple causes. This product primarily addresses noise related to seal degradation. If noise persists, consult a mechanic to diagnose other potential issues.
Pros and Cons
Pros
Effectively stops and prevents oil leaks.
Reduces oil consumption and engine smoke.
Maintains and regenerates critical engine seals.
Quietens engine operation.
Wide compatibility with most engines and oils.
Simple to use, requiring no special tools or expertise.
Cons
Not suitable for motorcycles with a wet clutch.
Sealing effects become noticeable after 600-800 km, requiring patience.
Requires a second application every 30,000 km for preventative maintenance.
Setup, Compatibility & Care
Application:
Ensure your engine oil is at the correct level.
Add one 300 ml can of Liqui Moly Motor Oil Saver for every 5 liters of motor oil.
Run the engine until it reaches its normal operating temperature.
The product works best when added during an oil change, but can be added at any time.
Compatibility:
Suitable for all commercially available motor oils in gasoline and diesel engines.
Compatible with engines equipped with turbochargers.
Safe for use in vehicles with catalytic converters.
Suitable for vehicles with a diesel particulate filter (DPF).
IMPORTANT: Not suitable for motorbikes with a wet clutch, as it can affect clutch performance.
Care:
No specific care is required for the product itself once added to the engine oil.
For a lasting effect, it is recommended to add the product again every 30,000 km as a preventative measure.