QTX Replacement Pump - Small
Not Available
The 160.467UK from QTX is a replacement pump for QTFX range of smoke and haze machines.
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners of QTFX range smoke and haze machines who need a reliable replacement pump. The key benefit is restoring your machine's fogging capability quickly and efficiently. A potential caveat is ensuring this specific small pump is the correct replacement part for your QTFX model. The QTX Replacement Pump - Small (160.467UK) is designed as a direct replacement for specific QTFX smoke and haze machine models, ensuring continued performance and output.
All features
| Model Part Number | 160.467UK |
|---|---|
| Brand | QTX |
Extended Product Information
FAQs
What QTFX models is this pump compatible with?
This is a replacement pump for specific models within the QTFX range. Please consult your QTFX machine's manual or product listing to confirm compatibility with the 160.467UK part number.
Do I need special tools to install the pump?
Typically, basic tools like screwdrivers may be needed to open the casing. Refer to your specific QTFX machine's service guide for precise requirements.
How often should I replace the pump?
Pump lifespan varies depending on usage frequency and fluid quality. Replacement is typically needed when the pump fails to draw fluid or produce smoke/haze, or if it becomes excessively noisy.
Can I use any type of smoke fluid with this pump?
It is recommended to use only fluids specifically designed for QTFX smoke and haze machines. Using incorrect fluids can damage the pump and the machine.
What is the warranty on this replacement pump?
Warranty information varies by retailer. Please check the product listing or contact the seller for details regarding the warranty period and terms.
Is this pump suitable for commercial use?
Yes, this is a genuine replacement part designed for the QTFX range, intended for use in various settings including commercial applications where QTFX machines are deployed.
Troubleshooting
Machine not producing smoke/haze after pump replacement
Verify all electrical connections to the new pump are secure. Ensure the fluid lines are correctly attached and not kinked. Check that the machine is filled with the correct type of fluid and that the fluid level is adequate. Confirm the new pump is the correct model for your QTFX machine.
Pump is making unusual noises
Inspect the fluid lines for any blockages or air bubbles. Ensure the pump is securely mounted and not vibrating excessively against the casing. If noise persists, the pump may be faulty and require replacement.
Low smoke/haze output
Check for blockages in the nozzle or fluid lines. Ensure you are using the correct, high-quality smoke fluid. The heating element in the machine might also require cleaning or servicing.
Pump runs but no fluid is drawn
Ensure the intake end of the fluid line is submerged in the smoke fluid. Check for air leaks in the fluid line connections. The pump itself may be malfunctioning or have an internal blockage.
Pros and Cons
Pros
- Restores original fog/haze output
- Designed for seamless integration with QTFX machines
- Helps avoid costly machine replacement
- Ensures continued event or performance reliability
- Cost-effective solution for maintenance
Cons
- Only compatible with specific QTFX models
- Requires some technical comfort for installation
- May need additional sealants or tools not included
- Performance dependent on the overall health of the smoke machine
- Not a universal pump solution
Setup, Compatibility & Care
Compatibility: This pump (160.467UK) is a replacement part specifically for the QTFX range of smoke and haze machines. Always verify that your QTFX machine model is listed as compatible with this pump before purchasing. Refer to your QTFX machine's user manual for confirmation.
Setup:
- Safety First: Ensure the smoke machine is unplugged and has completely cooled down before beginning.
- Access Pump: Open the machine casing according to your QTFX model's service instructions.
- Disconnect Old Pump: Carefully disconnect the fluid lines and electrical connections from the old pump.
- Remove Old Pump: Unscrew or unclip the old pump from its mounting.
- Install New Pump: Secure the new QTX Replacement Pump (160.467UK) in the same position.
- Reconnect Lines: Attach the fluid lines and electrical connections to the new pump, ensuring a secure fit.
- Reassemble: Close the machine casing.
- Test: Plug in the machine and test its operation with appropriate smoke fluid.
Care: While the pump itself requires minimal direct care, ensuring the fluid lines are clear and using only recommended smoke/haze fluids will prolong its life. Regularly check for any blockages in the fluid path.