Best current price£35.17from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£35.17Visit shop Freefoam Blue Weatherboard Cladding Two Part H Trim - 3Mtr Colonial
Visit shop2 offers from £35.17 - £37.63
View price history by clicking the chart icon.
The Weatherboard Cladding Two Part H Trim is an essential component for contractors and DIY homeowners installing 170mm weatherboard systems who want a seamless, professional finish at joint points. Designed for both vertical and horizontal applications, this trim ensures that the connections between boards remain watertight and aesthetically pleasing. While the two-part system provides a highly secure fit, it requires precise alignment during the initial installation of the base section to ensure the front cover snaps in correctly.
| Model Part Number | FC315E3CLB |
|---|---|
| Brand | Freefoam |
No, the H Trim is specifically designed for 170mm weatherboard systems and will not fit other sizes.
Fixings are typically provided by your installer based on the substrate (timber or steel); the trim itself is the finishing profile.
Yes, it is designed for exterior use and is colour-matched to resist fading and environmental wear.
The trim can be cut easily using a fine-toothed hand saw or a power mitre saw with a plastic-compatible blade.
Because the trim is colour-matched to the weatherboard range, painting is generally not required or recommended.
Check that the cladding boards are not protruding into the channel and ensure the base is not warped or overtightened against the wall.
Ensure the cladding boards were measured and cut square before installation and that they are fully seated against the base section.
To install, first measure and cut the base section to your required length. Fix the base to the timber battens, ensuring it is perfectly plumb or level. Once your 170mm weatherboard cladding is securely fixed against the base, align the front cover and snap it into the slots using firm, even pressure along the entire length.
Compatibility is strictly limited to 170mm weatherboard systems; do not attempt to use this with other sizes as the snap-fit mechanism will not engage correctly. For care, simply clean with a soft cloth and mild soapy water as needed to remove debris or dust; avoid abrasive cleaners that could scratch the colour finish.
