Best current price£32.84from B&Q
Shopping.co.uk recommended and popular offers
B&Q£32.84Visit shop B&Q - Chrome-Plated Standard Tubular Bottle Basin Trap With Adjustable Height Silver (Dia)50mm 761G
Visit shop1 offer from £32.84
View price history by clicking the chart icon.
This Flomasta adjustable height bottle trap is designed for bathroom sinks, offering a 50mm water seal to prevent unpleasant odors and harmful bacteria from entering your living space. It features a 32mm compression outlet for easy connection to standard waste pipes. While providing essential hygiene, note that proper installation is crucial for its effectiveness.
| Brand | Flomasta |
|---|
A bottle trap, also known as a P-trap or S-trap, is a plumbing fixture designed to retain a volume of water. This water seal prevents sewer gases, odors, and vermin from entering a building through drains.
This trap has a 32mm compression outlet, which is a standard size for bathroom basins. It should connect to standard 32mm waste pipes. If your pipe size differs, you may need an adapter.
It is recommended to clean the trap periodically, especially if you notice slow draining. A general guideline is every 6-12 months, or whenever debris is visible during inspection.
While designed for basins, the 32mm outlet is common. However, kitchen sinks often have larger waste pipes (40mm) and may experience more grease and food waste, which could lead to more frequent blockages in a 32mm trap.
Adjustable height means that the vertical positioning of the trap can be modified during installation. This allows for greater flexibility in aligning the trap with both the basin outlet and the existing drainpipe, accommodating variations in plumbing setups.
A 50mm water seal refers to the depth of water retained within the trap. A 50mm seal is generally considered sufficient to effectively block sewer gases and odors in typical domestic plumbing.
Check all compression fittings are securely tightened. Ensure the trap is correctly oriented and all seals are properly seated. Run water to confirm the seal is established.
The trap may be blocked. Unscrew the bottom bottle section, clean out any debris, and reassemble.
Verify that the water seal is consistently present. If the basin is rarely used, odors can occur if the water seal evaporates; run water periodically. Ensure no other plumbing issues are allowing gases to bypass the trap.
Setup: Ensure the area where the trap will be installed is clean. Connect the trap's compression outlet to your existing waste pipe, tightening the compression nut securely but without overtightening. Adjust the height as needed to align with the basin's waste outlet and the waste pipe. Once installed, run water through the basin to fill the trap and establish the water seal.
Compatibility: This trap is designed with a 32mm compression outlet, which is standard for most bathroom basins. It is compatible with standard PVC or copper waste pipes of the same diameter. For different pipe sizes, appropriate adaptors may be required.
Care: Periodically clean the exterior of the trap with a damp cloth. To clean the internal trap, unscrew the retaining nut at the bottom, carefully remove the bottle section, empty any debris, and rinse before reassembling. This should be done as needed, typically when you notice slow draining or potential blockages.
