Floorsaver Epoxy Floor Paint - Grey

Yes, it is designed for use on both bare concrete and previously painted surfaces that are well-bonded.

The floor is generally walkable within 24 hours when applied in conditions around 15 degrees Celsius.

This product is primarily formulated for indoor commercial, industrial, or garage use and is not recommended for exterior surfaces exposed to direct weather.

The epoxy is self-priming on clean, prepared concrete. Ensure the surface is free of dust and oil before painting.

Since this is a water-based formula, you can clean your rollers and brushes with warm soapy water immediately after use.

Check the surface for residual grease or dampness. Ensure the concrete was properly cleaned and etched prior to application.

Ensure the product is mixed for the full recommended time and use a high-quality roller to ensure even coverage during application.

Check ambient temperature and humidity levels. Low temperatures and high humidity will significantly extend the curing process.