AK Interactive Elastic Rigging Thin - 1:32/1:35/1:48
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for modelers seeking to add realistic rigging to their projects, from aircraft to sci-fi models. The AK Interactive Elastic Rigging Thin offers a simple solution for creating tight, natural-looking bracing. Keep in mind that while it's versatile, precise handling with tools like tweezers and sharp blades is recommended for the best results.
All features
| Model Part Number | 9137 |
|---|---|
| Brand | AK Interactive |
Extended Product Information
FAQs
What kind of glue should I use?
Use cyanoacrylate glue (super glue) for attaching the elastic rigging.
Can I paint the rigging?
Yes, you can paint it with ink markers or silver paint after it's in place.
What scales is this rigging suitable for?
It is suitable for 1:32, 1:35, and 1:48 scale models.
How long is the rigging on the spool?
The rigging is 20m (65ft) long on the spool.
What is the thickness of the rigging?
The thickness is 110D (+/- 0.055 mm).
Can I use this for any type of model?
It's best for models where you need to simulate thin lines, such as rigging on airplanes or ships, or sci-fi models.
How do I prevent the rigging from tangling?
Handle the rigging with care and store the spool properly to prevent tangling.
Troubleshooting
Rigging is not staying in place.
Ensure the glue is fully cured and that the surfaces are properly prepared. Consider using a small amount of glue.
Difficulty in cutting the thread cleanly.
Use a new, sharp blade for precise trimming. Ensure the blade is perpendicular to the thread.
Pros and Cons
Pros
- Easy to install due to its elasticity.
- Suitable for various modeling projects.
- Allows for a natural and tight fit.
Cons
- Requires careful handling with tools.
- Excess material needs to be trimmed with a sharp blade.
- Painting may require specific techniques for best results.
Setup, Compatibility & Care
- Preparation: Ensure your model's surfaces are clean and free of debris before applying the rigging.
- Cutting: Cut the elastic thread to the required length, leaving a little extra for adjustments.
- Attachment: Use cyanoacrylate glue (super glue) to attach the rigging to your model.
- Tensioning: Gently stretch the elastic thread to achieve the desired tension.
- Trimming: Once the glue is dry, trim any excess thread with a sharp blade.
- Painting: If desired, paint the rigging with an ink marker or silver paint.
Compatibility: This product is compatible with most plastic and resin model kits in 1:32, 1:35, and 1:48 scales.
Care: Store the spool in a cool, dry place away from direct sunlight. Handle the thread with care to prevent tangling or breaking.