Shopping.co.uk

Plasson Stop Tap - 25 x 15mm Pushfit

Plasson Stop Tap - 25 x 15mm Pushfit

Ideally used for conveying water and other fluids in urban and inter-urban infrastructure, industr...

Best current price£69.73from Bradfords

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £69.73

View price history by clicking the chart icon.

BradfordsPlasson 0341C Mdpe Pushfit Stop Tap (Pe X Cu/Pb/Pex) 25 X 15Mm
£25.00 delivery
£69.73
Visit shop

Product Information

Full details

The Plasson MDPE Pushfit Stop Tap (25 x 15mm) is designed for plumbers and DIY enthusiasts needing to reliably connect MDPE pipes to internal plumbing systems like copper, polybutylene, and PEX. Its key benefit is the tool-free, pushfit connection, offering a quick and secure joint for water conveyance in urban, industrial, and agricultural settings. A significant caveat is that it is intended for above-ground installations only.

All features

Model Part NumberPV0341CU025015
BrandPlasson

Extended Product Information

FAQs

Can this stop tap be used for underground pipework?

No, this Plasson stop tap is specifically designed for above-ground installations only and should not be used for underground applications.

What types of pipes can this fitting connect?

This fitting is designed to connect MDPE pipes to internal plumbing pipes made of copper, polybutylene (PB), and PEX.

Do I need any special tools to install this stop tap?

No, the installation is tool-free. You only need your hands to push the pipe into the fitting. A marker may be useful for indicating insertion depth.

Is this fitting approved for drinking water?

Yes, the Plasson MDPE Pushfit Stop Tap is WRAS approved, meaning it meets the standards for use in drinking water systems and is accepted by water companies.

What is the maximum pressure this fitting can handle?

The fitting is PN16 pressure rated, meaning it is designed to handle systems operating at pressures up to 16 bar (approximately 232 psi).

How do I ensure a secure connection?

Push the pipe firmly into the fitting until it is fully seated. You should feel or hear it lock into place. Gently tug the pipe to confirm it is securely engaged. Ensure the pipe end is properly prepared.

What are the dimensions of this stop tap?

The dimensions are 25mm for the MDPE pipe connection and 15mm for the connection to internal pipes (copper, polybutylene, PEX).

Troubleshooting

Leak at the connection point

Ensure the pipe is fully inserted into the fitting. Check the pipe end for damage or debris and re-cut if necessary. Ensure the pipe is round and has a slight chamfer if it's MDPE. Try disconnecting and re-seating the pipe.

Pipe will not insert into the fitting

Verify the pipe diameter matches the fitting's requirements (25mm for MDPE side, 15mm for internal pipe side). Ensure the pipe end is clean, free of obstructions, and not deformed. If using MDPE, ensure a clean, square cut.

Fitting feels loose on the pipe

Confirm the pipe has been pushed in fully until it locks. Attempt to gently pull the pipe to ensure it is securely engaged by the pushfit mechanism. If it remains loose, the pipe may be damaged or not inserted correctly; remove and re-insert.

Product performance degrades over time

Ensure the fitting is used within its specified PN16 pressure rating and is installed correctly above ground. Check for external physical damage. If leaks develop, the joint may need to be redone or the fitting replaced.

Pros and Cons

Pros

  • Fast and easy tool-free installation saves time and labor.
  • Connects multiple pipe types (MDPE, copper, PB, PEX) with a single fitting.
  • WRAS approval ensures suitability for potable water systems.
  • Durable, non-corrosive polypropylene construction for long service life.
  • Compact size is beneficial for space-constrained installations.
  • High PN16 pressure rating provides reliability.

Cons

  • Limited to above-ground installations only.
  • Requires a clear pipe end for proper pushfit connection.
  • May require specific preparation of MDPE pipe (e.g., chamfering) for optimal seal.
  • Not suitable for underground or submerged applications.
  • Connector size is fixed at 25 x 15mm, not adaptable for other dimensions.

Setup, Compatibility & Care

Setup:

  1. Ensure the ends of the MDPE, copper, polybutylene, or PEX pipes are clean, dry, and free from damage.
  2. For MDPE pipes, ensure a clean, square cut and a slight chamfer on the outer edge.
  3. For copper, PEX, and polybutylene pipes, ensure the ends are smooth and round.
  4. Simply push the pipe firmly into the fitting until it is fully seated. You should feel or hear a click as the internal mechanism secures the pipe.
  5. To ensure a secure joint, gently pull on the pipe to confirm it is locked in place.
  6. This fitting is designed for above-ground installations only.

Compatibility:

  • Primary Pipe Type: MDPE (Medium Density Polyethylene)
  • Connects To: Copper, Polybutylene (PB), PEX pipes
  • Maximum Pressure: PN16
  • Installation Location: Above ground only

Care:

  • The fitting is constructed from durable, non-corrodible polypropylene and requires minimal care.
  • Regularly inspect joints for any signs of damage or leaks, especially in high-usage areas.
  • Clean the exterior of the fitting with a damp cloth if necessary. Avoid abrasive cleaners.

Price History

DatePrice
Visit shop