Vaunt Hook Pot Magnet

The Vaunt Hook Pot Magnet has a holding force of 220N, which translates to approximately 22kg (48.5 lbs). This maximum capacity is achieved only when used with full contact on a perfectly smooth, flat, and clean ferrous metal surface.

It is designed for use on smooth, flat ferrous metal surfaces such as steel or iron. Performance will be reduced on surfaces that are curved, textured, painted, or made of non-ferrous materials like aluminum or plastic.

Yes, the nickel-plated finish provides rust resistance, making it suitable for outdoor use. However, it's best to wipe it dry after exposure to moisture to maintain its condition and prevent any potential surface corrosion.

The welded eyelet allows you to hang items from the magnet, such as tool bags or pouches, or to attach a safety lanyard if necessary.

The holding force decreases significantly with uneven contact. On slightly curved or textured surfaces, the actual weight it can safely hold will be considerably less than the 22kg maximum.

Yes, like all strong magnets, it can potentially damage sensitive electronic devices, credit cards, or magnetic media. Keep these items at a safe distance from the magnet.

No, this product is designed as a temporary hanging solution. It relies on magnetic force and is not intended for permanent fixture.

Ensure the magnet and the surface are clean and free of debris. Verify the surface is made of a ferrous material (like steel) and is as flat and smooth as possible. Check that the object being hung does not exceed the 22kg limit.

If the magnet is strongly attached to a very flat surface, try sliding it off sideways rather than pulling directly. A slight angle might help break the magnetic seal.

While nickel-plated for rust resistance, prolonged exposure to moisture in harsh environments may cause minor surface blemishes. Wipe dry after use and store in a dry area. If rust appears, it can usually be cleaned gently with a soft cloth.