Setup, Compatibility & Care
To install, remove the wheel and pull the old pads using the retention tab. Before inserting the new E01S pads, clean the brake rotor with isopropyl alcohol to remove oil or residue. These pads are compatible with the following Shimano braking systems:
- BR-M575
- BR-M486
- BR-M485
- BR-M446
- BR-M445
Regularly check the thickness of the friction material; replace the pads once the material wears down to 0.5mm. Avoid contaminating the pads with chain lubricant or cleaning sprays, as oil will drastically reduce braking power and cause squealing.