Setup, Compatibility & Care
Installation requires a 24V DC driver capable of handling the 150W load. Always clean the mounting surface with isopropyl alcohol before applying the adhesive backing to ensure long-term adhesion.
- Compatibility: Ensure your transformer is rated for at least 150W to prevent flickering or under-driving the LEDs.
- Care: Avoid sharp bends at 90-degree angles, which can damage the internal COB filaments. Use corner connectors if a change in direction is needed.
- Heat Management: While COB LEDs are efficient, mounting them in an aluminium channel acts as a heat sink, which will significantly extend the lifespan of the diodes.