Setup, Compatibility & Care
To install, mark your desired grid pattern on the wall or fence. If drilling into masonry or brick, use a hammer drill with an appropriate-sized masonry bit to house the vine eyes. For wooden fences, you can often pilot-drill the holes before screwing the eyes in manually.
Once the eyes are installed, thread the galvanised wire through the loops, securing the ends with tight knots or wire crimps. While the galvanised coating is highly durable, avoid scratching the surface with abrasive metal tools during installation to prevent exposing the inner steel. To maintain the setup, check the tension of your wires once a year—usually after the winter—and tighten if necessary as the wood or mortar may shift slightly with temperature changes.