Best current price£1.99from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£1.99Visit shop Plumbright Copper Press-Fit Fitting Coupling 15Mm, Gas Fitting 6270Sm.15gy 6270M.15gy
Visit shop2 offers from £1.99 - £18.84
View price history by clicking the chart icon.
The Plumbright Copper Press-Fit Fitting Coupling (15mm) is designed for professional plumbers and contractors seeking a reliable, heat-free connection solution for gas installations. These fittings deliver permanent, secure joints that significantly reduce labor time compared to traditional brazing; however, they require specialized M-Profile pressing tools to ensure a leak-proof seal.
| Model Part Number | 6270SM.15GY |
|---|---|
| Brand | Plumbright |
While these are gas-rated, always confirm with local building codes if they meet specific potable water standards in your region.
No, this product is specifically designed for M-Profile pressing systems. Using incompatible profiles will result in an insecure connection.
No, the fitting relies on an integrated high-quality O-ring to create a gas-tight seal when properly crimped.
The fitting is rated for standard gas distribution pressures; please refer to the technical datasheet for the specific bar or PSI limits.
No. Once a press-fit connection is made, it is permanent. If misaligned, the pipe must be cut out and a new fitting must be used.
Ensure the pipe was fully inserted and that no burrs were present on the cut end of the pipe, which can damage the internal O-ring.
Check that you are using the correct M-Profile jaw and ensure the fitting is properly centered within the jaws before beginning the cycle.
The fitting was not pressed with sufficient force. Check your tool calibration and verify that the battery is fully charged.
To install, first verify that the 15mm copper pipe is perfectly round and free of surface scratches. Insert the pipe into the coupling until it hits the internal stop, marking the depth to ensure it does not move during the press. Position your M-Profile press jaw squarely over the designated crimp zone of the fitting. Trigger the press tool and maintain pressure until the cycle finishes. No lubrication is required for the fitting itself. Once installed, perform a standard system pressure test according to local gas safety regulations. Store fittings in a clean, dry environment to prevent oxidation before installation.
