Nikon AF-S 14-24mm f/2.8G ED Lens - Nikon

This lens is compatible with Nikon F-mount 35mm SLR and digital SLR cameras. It works on both FX (full-frame) and DX (APS-C crop sensor) format bodies, though the effective focal length will change on DX bodies.

Due to its bulbous front element and integrated lens hood, standard screw-on filters cannot be directly attached to the front of this lens. Specialized rear-gel filter holders or large external filter systems are required if you wish to use filters.

The constant f/2.8 aperture provides two main benefits: excellent low-light performance, allowing for faster shutter speeds in dim conditions, and a consistent depth of field throughout the entire zoom range, which simplifies exposure settings and creative control.

Always start by using a blower bulb to remove loose dust. Follow with a soft, clean lens brush. For smudges or fingerprints, use a clean microfiber lens cloth with a small amount of lens cleaning solution. Wipe gently in a circular motion from the center outward, being careful not to scratch the surface.

The Nano Crystal Coating is a specialized anti-reflective coating applied to lens elements. Its primary function is to virtually eliminate internal reflections across a wide range of wavelengths, significantly reducing ghosting and flare for clearer, higher-contrast images, especially when shooting into bright light sources.

Yes, its fast f/2.8 aperture, ultra-wide perspective, and quiet Silent Wave Motor (SWM) make it very suitable for video recording, particularly for capturing expansive scenes or in challenging low-light environments without audible autofocus noise.

The minimum focusing distance for the Nikon AF-S 14-24mm f/2.8G ED Lens is 0.28 meters (approximately 11 inches or 0.92 feet) from the sensor plane.

Ensure the lens's `A/M` (Autofocus/Manual) switch is set to `A/M`. Also, check your camera's focus mode settings to ensure it is set to an autofocus mode. Clean the electrical contacts on both the lens and camera body with a dry, clean cloth.

Verify that your camera's autofocus point is correctly placed on your subject. For challenging conditions, switch to manual focus (`M` on the lens) and use Live View to precisely fine-tune focus. Ensure your aperture setting is appropriate for desired depth of field; very wide apertures (like f/2.8) have a shallower depth of field.

While the Nano Crystal Coating significantly reduces flare, strong direct light sources can still cause it. Reposition yourself or your subject to avoid direct light hitting the front element. Ensure the integrated lens hood is fully extended. Clean any smudges or dust from the front element, as these can exacerbate flare.

Ensure you are aligning the mounting marks on the lens and camera body correctly. Do not force the lens. Check for any obstructions on the lens mount or camera mount. If the lens seems stuck, gently wiggle while pressing the release button, ensuring no debris is caught.

Normal operation of the Silent Wave Motor is quiet, but unusual grinding or clicking could indicate an issue. Stop using the lens and contact Nikon service or a qualified repair center for inspection. Avoid attempting self-repair.