Best current price£9.49from eBay
Shopping.co.uk recommended and popular offers
eBay£9.49Visit shop FluidsHQ Electrical Contact Cleaner Spray Switch Relay Circuit Cleaner 500ml
Visit shop
The Range£9.49Visit shop Fluidshq Electrical Contact Cleaner Spray Switch Relay Circuit Cleaner 500Ml - White
Visit shop4 offers from £9.49 - £10.49
View price history by clicking the chart icon.
FluidsHQ Electrical Contact Cleaner is a professional-grade, fast-acting solvent designed for technicians, automotive enthusiasts, and DIY hobbyists who need to restore conductivity to sensitive electronic parts. Its primary benefit is the non-conductive, residue-free formula that safely clears away oxidation, oil, and moisture to prevent system failures; however, users must ensure that all power sources are disconnected before application to prevent electrical hazards.
| Brand | FluidsHQ |
|---|
Yes, the formula is compatible with most plastics, including those commonly found in consumer electronics.
While the solution is non-conductive, it is standard safety protocol to turn off and unplug the device to prevent any risk of arcing or short-circuiting.
You must wait until the cleaner has evaporated completely, which usually takes several minutes depending on the volume used.
Yes, it is excellent for removing oxidation and grease from battery terminals to ensure a solid electrical connection.
Yes, it is very effective at cleaning audio jacks to eliminate static or channel dropouts caused by dust and oxidation.
Heavy oxidation may require multiple applications or light agitation with a soft, non-abrasive tool.
Use shorter, more precise bursts and ensure you are working on a flat surface to prevent runoff into unwanted areas.
Ensure the device is left in a well-ventilated area for an extended period to allow for complete evaporation.
Before use, ensure the area is well-ventilated and keep the canister away from open flames or high-heat surfaces. For setup, simply remove any protective caps and aim the nozzle toward the target component. For deep-seated components, you may need a straw attachment if available. Always power down your device and unplug it from any wall outlet or battery source before spraying. Allow the component to dry for at least 5-10 minutes—or longer if the spray has pooled in crevices—before re-applying power. Store the canister in a cool, dry place out of direct sunlight to maintain the integrity of the chemical propellant.
