eufy X10 Pro Omni Robot Vacuum Replacement Parts - Rubber Roller Brush and Brush Guard

It is recommended to replace the rubber roller brush and brush guard every 3-6 months, depending on your usage frequency and the type of debris your robot vacuum typically cleans.

No, this replacement kit is specifically designed for the eufy X10 Pro Omni Robot Vacuum. Using it with other models may result in improper fit and performance.

No, the rubber roller brush and brush guard are designed for easy, tool-free installation and removal.

You can clean the roller brush by removing it from the vacuum and using a dry cloth or soft brush to remove any tangled hair or debris. Avoid using water or cleaning solutions directly on the rubber brush.

The brush guard works in conjunction with the main roller brush to enhance cleaning efficiency. It helps guide debris towards the brush and can prevent larger objects from getting stuck, while also aiding in minimizing hair tangles.

Ensure the main brush and brush guard are installed correctly and can spin freely. Also, check the vacuum's suction port and dustbin for any blockages. If the issue persists, consult the main eufy X10 Pro Omni user manual or contact customer support.

Ensure the rubber roller brush is correctly seated and can spin freely. Check for any tangled debris around the brush or in the compartment. Verify that the brush guard is properly installed and in contact with the brush.

The noise might be due to improper installation or an object stuck in the brush. Power off the vacuum, remove the brush and guard, and inspect for foreign objects. Reinstall carefully, ensuring all parts are securely in place.

This usually indicates the roller brush or brush guard is not positioned correctly. Remove them and try reinstalling, making sure they are fully seated and aligned with the compartment.