Best current price£5.25from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.25Visit shop B&Q - Pz Double Self-Countersunk Yellow-Passivated Steel Screw (Dia)3.5mm (L)25mmPack Of 100
Visit shop1 offer from £5.25
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals seeking reliable fasteners for woodworking projects. The TurboDrive Pz Yellow-Passivated Steel Screws offer durable performance and corrosion resistance, ensuring secure joins. A potential caveat is that they are specifically designed for wood and may not be suitable for other materials without pre-drilling or specialized applications. This pack contains 100 screws, each 25mm long with a 3.5mm diameter, featuring a yellow zinc-plated finish for enhanced protection and a double countersunk head for a flush finish.
| Colour | Yellow |
|---|---|
| Brand | TurboDrive |
Use a Pz (Pozidriv) screwdriver or drill bit. Apply firm, consistent pressure and drive the screw straight into the pre-drilled pilot hole for best results.
Yes, the yellow zinc passivation offers good corrosion resistance for protected outdoor applications, such as garden furniture or shed assembly. For high-exposure environments, alternative materials or coatings might offer superior longevity.
They are constructed from durable steel with a yellow zinc-plated finish.
The yellow passivation is a coating applied to the steel to provide a barrier against corrosion and rust, extending the lifespan of the screw.
These screws are designed for wood. For plasterboard, you would typically use specialized plasterboard screws or appropriate anchors and screws for the fixing method.
For a 3.5mm diameter screw, a pilot hole of approximately 2mm is generally recommended for softwood. For hardwoods, you may need a slightly larger pilot hole, around 2.5mm, to prevent splitting.
This pack contains 100 screws.
Ensure you are using a Pz (Pozidriv) driver bit, not a Phillips head. Use a pilot hole slightly smaller than the screw's diameter. Apply steady, even pressure and avoid over-driving.
Pre-drill a pilot hole that is approximately 60-70% of the screw's shank diameter. Ensure you are not driving the screw too close to the edge of the wood.
Verify that the countersink area of the wood is adequately prepared, or that the screw head is not obstructed. Ensure you are using the correct driver bit to prevent cam-out, which can prevent proper seating.
The yellow zinc passivation provides good but not indefinite protection. Ensure screws are stored in a dry place and used in applications where they are not constantly exposed to moisture or harsh chemicals. For exterior use, consider screws with a more robust coating if prolonged wet conditions are expected.
Setup:
These screws require a Pz (Pozidriv) driver bit for proper engagement. Using the incorrect bit (e.g., Phillips) can strip the screw head. Ensure the screw is aligned perpendicularly to the material surface before driving. For hardwoods or to prevent splitting in softer woods, it is recommended to pre-drill a pilot hole slightly smaller than the screw's shank diameter (e.g., 2mm for a 3.5mm screw).
Compatibility:
Care:
Store screws in a dry environment to maintain the integrity of the yellow zinc passivation. Avoid prolonged exposure to excessive moisture or corrosive substances, which can eventually lead to rust despite the protective coating. Clean any dust or debris from the screws before installation if they have been stored for a long time.
