Best current price£12.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.99Visit shop B&Q - 400 Ml Blue Peelable Film Semi-MattFlexible Protective Coating For Alloy Wheels & Tuning Parts
Visit shop1 offer from £12.99
View price history by clicking the chart icon.
The SolaDirect Peelable Spray Film is an ideal solution for automotive enthusiasts and DIY hobbyists looking to customize or protect surfaces like alloy wheels and tuning parts with a temporary, semi-matt blue finish. It excels at providing a protective barrier against moisture, dirt, and UV rays while remaining fully removable, though the ease of peeling can vary significantly depending on the substrate, the thickness of the application, and the original surface condition.
| Colour | Blue |
|---|---|
| Model Part Number | 1415484 |
| Brand | SolaDirect |
Yes, it can be applied to various materials, but always test on a small, hidden section first to ensure it does not interact with the existing clear coat.
Coverage depends on wheel size and spoke complexity, but typically 2 to 3 cans are recommended to achieve sufficient thickness for easy future removal.
It provides a soft, elastic layer that can cushion minor impacts, though it is not as durable as a hard ceramic or paint-protection film.
Use mild automotive soap and water. Avoid high-pressure washers directly on the edges of the film, which may cause it to lift.
Longevity depends on exposure to the elements and mechanical wear, but it is intended for long-term use until you decide to remove it.
Yes, the formula includes additives to help mitigate damage caused by UV exposure, keeping the blue pigment vibrant for longer.
This often occurs if the coating was applied too thinly; ensure at least 3-4 coats for a build thickness that supports easy removal.
Ensure the surface is completely dry and degreased. Increase the distance between the nozzle and the surface during the next application.
Edges were likely not masked correctly or the surface was not degreased thoroughly at the perimeter; clean the area again and ensure full coverage.
To achieve the best adhesion and clean edges, the target surface must be completely clean, dry, and free of all oil or grease residue. Use a high-quality wax and grease remover before application. Always perform a patch test on an inconspicuous area to confirm compatibility with the substrate. During application, keep the canister at the recommended distance to prevent runs or pooling. For maintenance, avoid using harsh chemical solvents that could prematurely dissolve or weaken the film. If the film begins to wear, it can be touched up or fully removed by lifting an edge and pulling slowly and steadily.
